Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

There is supposed to be a small plastic wheel on the pin that fits into the channel on the window part of the crank mechanism. It broke into pieces. Is this wheel replaceable? Or is there a replacement for the whole crank assembly for this window? I don't know what the manufacturer of the window was ... (cont.)

Hinges/Bracket on right if looking at the window from the inside Need upper and lower bracket (2pcs) - Pivot Bars Plastic latch pieces (20 pieces) 1 3/4" high from top to point and 5/8" across. One of the above items is Truth 30744 The window is 24"x60" Please see the attached pictures ... (cont.)

Replacement cranks needed 1 right crank out & 1 left crank out. We have taken out the right one and it has 40051 on it. I do not know if the other one has a different #

Hi, Can you please identify this part for me. The arm is around 32cm. The window open from the right to left when I am inside the house i.e. the hinge and the crank mechanism is on the left side.

The hinge part that attaches to the window and slides in the bracket has broken. Can I just purchase the plastic hinges? The rest of the parts seem to be working properly. Thanks, Jim

Please quote a hardware kit for Truth 30382 window bracket kit as pictured. Kind regards.

From end to crank plate is approximately 12 inches. Looking for Swisco replacement if possible.

I would like to replace top and bottom hardware on 6 windows.

The current crank no longer functions and cannot be repaired. It is marked Wright brand. It is sort of a bronze color. The glass part of the window is 18". The cranks arm that connects to the bottom of the window is approximately 13" before it goes into the crank case. I am guessing it is at least ... (cont.)

Looking for replacement sill mounted crank replacement. This one was damaged and now shaft doesn't intersect with gear. Sam is true in opposite window so I will need one of each "hand." Any help is appreciated!

Hi, I’m trying to replace a casement window operator. It’s a single-arm (not dual-arm) style, about 11” arm length with a ~4” base opening. Looks like a Truth/AmesburyTruth EntryGard type. The hinge arm is separate — I only need the main crank operator. Can you confir ... (cont.)

I need help to identify what part I need to replace my single arm crank operator. It is a truth arm but i cannot see any part stamp on this piece. There are part numbers on the hinges. The window manufacturer is Windsor and what looks like the date on the window is 1998. The crank length is 13-1/2" ... (cont.)

Hello I am trying to find a replacement crank and arm for my dashwood window that opens from the left to the right. The only marking I can find is a stamp on the arm that says "Truth"

I found a part number on the left side on the what I call a stopper so that the window can only go so far. Part number is 630793 AMS Truth. This was on the left. Also need to know how to attach it to the window side the pin side where it fastens is self exlanatory. I also need the holding clip for ... (cont.)

I am looking for four window closures, two of each directions. I have had great luck with your company finding me what I need, so I hope you can help.

I'm looking for left and right hand Truth operators 45251 white. The roller is 9/16" the arm length is 13.5 I need 2 of each Please let me know availability and price.

I was looking into your operator section, but since none of the operators looked exactly like mine, I’m not sure if there’s another one that fits the same window, just with a slight redesign.

Trying to find the part # for the operator.

Handle or spindle is stripped. This were installed in vinyl windows in 1994 in Urbana, Illinois. Need replace to please.FYI also has "Truth" stamped on it

There are, unfortunately, no identifying marks or labels except one number on one of the arms which is 30350. These windows have bars at the top of the window and bottom. Any information you can provide would be helpful. Thank you!