Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Operator arm is 10 1/4" long. What replacement operator parts will work in place of this old broken one?

need replacement part

Hi, What folding handle/cover works with the 39-014/13 operator? Thanks

Have a crank with "Wright" stamped on arm. "7702" stamped on base.

I have Anderson casements here at the hotel, 1964 vintage. The casement operators are stamped 7073B on the left openers, don't have a right handy to see what's there, but I need rights and lefts. Are replacements with 11.25" arms available? Thanks. Landon

the crank arm is 13 1/2 inches long and looks like the model 39-028. I need two (2) right and two (2)left hand operators. Please help with the correct model number

Will a 39-014 (39-013) fit a 16" and a 24" wide casement window? These are Bilt Best wood casements.

I need several operators for Hurd windows installed in a house built in 1988. The windows are wood inside and out, casement type. I would like about six left and six right operators, depending on price. Details should be seen in the photos. Length from the tip of the arm to the center of the gea ... (cont.)

As you can see from one of the photos threaded crank shaft where the window crank handle is supposed to fit onto it, is completely missing. I would really like to replace that threaded part, but if that is not possible then I would like to replace the existing operator. Also this one has a square pl ... (cont.)

code 39-014 // 013 seems to be what I'm looking for. Your opinion?

Window glass marking: 4 5 84 8 MW Window Frame marking: WS IGCC 178 CBA This photo is of a Truth manufactured operator with 12" of arm which I can measure. A smaller arm runs perpendicular to the large arm and measure about 4".

Hi, I am looking for a replacement for the attached window operator (will need a few). The part has a backwards "L" followed by a 2 on one side on the back, and "LH" on the other.

I am looking for a casement window opening units for a window made by a company called ROW which discontinued making these windows back in the ’80’s. Attached are some pictures of the unit. Need some help. All of the windows in this house are 24” wide and the control hinge is 12” from the bend ... (cont.)

I have a Caradco 1980 wood casement window and need a replacement crank operator . The orginal has a stamp on the inside with a part number 40055 LH ( left hand). Your 39-103 seems to be a correct replacement. Can you confirm

I was at your website looking for Caradco Crank that is 13-1/2", but could not find it on the website. Please help. I need one right arm and one left arm. I found fill part number is from parts. It is 358-1R and 358-1L. 40055 LH

What would you recommend for a replacement option for a Truth operator p\n 40056? Side note; I really like your site. The little things make a difference.

4 inches wide, arm is 12 inches long...the name on it is TRUTH...number is 45251

What is the part number for a handle to this operator?

The Caradco casement window operator in one of my windows has cracked/broken and no longer works. These windows were installed in 1971 when the house was built. It appears to me that your part number 39-013 (13.5" arm) most closely resembles my broken operator which also has a 13.5" arm. Would ... (cont.)

I have Caradco windows in my house, I need to replace a Casement Window operator. There is a number in the back of the casement which seems to be the part number, the number is 40056 RH. I believe RH means right hand. If this is correct, that is the side I need, however the Casement Window operator ... (cont.)