Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Need part crank is broken

Need to purchase right and left cranks for both of these units

hi would like to replace dual arm operator trying to identify correct replacement . thanks

The post will not stay in. I need entire crank like the picture. There is no name to be found anywhere to determine make of window. I hope u can help. Thank you. Vinnie

Entry guard window operator for crestline window numbers included are 20810 on the straight arm on the curved arm it's 30841L appears to be the operating arm is about 9 in long

I have a few casement windows in my house that need the crank system replaced. Really just looking for the gear mechanism if possible. Do they make comparable replacement parts for this model? Thank you in advance of your help!

Need to find replacement parts for this window crank. It has broken off and we cannot locate hardware that works for it.

gear broken

I have casement windows, circa 1982-84, that have cranks that have failed. I need both left and rights. From what I have found, US patent number 4.241.541 1982 and on the short arm is etched number 31538. Long arm is approx 9 1/2" and short arm approx 3 1/2" to swivel then 4"

I was thinking 39-156 39-107 39-114L Thoughts?

I have Semco windows and the crank operator appears to be the same brand. I am not sure of the gold gear mechanism. The window crank that you spin to open/close the window seems to have unscrewed itself from the unit, which now redners it uselss. Do i need to replace the entire piece, meaning, the o ... (cont.)

Attached are measurements. Label faded on operator, but lists as Truth. From available options, thinking 39-032 (and 39-031 for other side) would match but the 39-253RB/LB don't have the longer arm dimensions. Planning to order a couple to test out and then verify all are the same size (various wind ... (cont.)

Looking for window gear opener left and right side. Thank you

Hello, two of my windows have broken cranks, as shown in the pictures. On one the inner mechanism (removed) looks damaged and won't fit back in and I'm able to use the crank handle to open the window (with difficulty) but it won't close it. On the second window, the inner mechanism and the operator ... (cont.)

Attached are photos of Truth Hardware casement operators. While these are stamped with 20810, they look like the 39-032 EntryGard Dual Arm Operator that I see on your website. The arms look to be the 10 3/4" and 4 7/16". Would you be able to confirm the part?

Hi, I am trying to find these for my customer she said they are Certainteed windows the bottom of the operator says PAT 1982 so im guessing there old . What other information might you need im hitting roadblocks everywhere I look Look forward to hearing from you

Hello,I have windows that were placed about 20 years ago. Some of the cranks mechanisms no longer work to open the windows and many of the covers are cracked. I have included photos. Are you able to identify what is there and what we can use to replace them?Thanks ever so much for your help.Julie ... (cont.)

Dear Expert - recently purchased an older home and realized some of the window operators were broken. I have included pictures of the broken one as well as one of the functioning ones for reference. Please advise what replacement parts are needed. Than you kindly!!!

Looks like "Entry Guard"by "Truth" the carpenters were kind enough to build in a removable trim piece for access. i have 4 of these windows and all of them have fallen apart.i have watched your video on replacement and i can handle it.I would like to know if you have these parts and how much they ar ... (cont.)

Since the mechanism isn't cranking window in and out anymore, I am assuming I need the gear assembly. Or what is best for longevity.