Viewing all customer Discussions for:

39-044 Getty Operator, 9" arm

I would be thrilled if you have a replacement for this mechanism. I have a house with very old windows which use these cranks

Looking to replace this casement operator (including crank); originally installed about 18 years ago. Length of base piece that includes four screw holds (two on each end) is 5 1/4", width is 9/16". Arm is 9-10" long (hard to tell, as it no longer moves), 11/16" wide. Many thanks for your help; plea ... (cont.)

Truth ellipse straight arm operator 3/8 spline

No makers marks, aluminum, swings to the left, arm is 9 inches after the curve. Mounts via 4 bolt holes

This is an awning assembly needed for a rehab we are doing. I see something similar on your site but it has a shorer lever arm. Please adviseRegardsMark

I just provided the photos of Right Part of the Window and I need 15 of them, as well as 20 left parts (that is absolutely the same size as right one) 15 Right Parts 20 Left Parts 1) How much will it costs for all of the parts? 2) How long it will take to deliver the parts to Brooklyn, NY 11229? ... (cont.)

Hello, I need to replace the right and left side casement operators in a JT Garden window. The attached photos are of the left side operator. The 39-466/467 have the same hole pattern but the arm is slightly longer I think. Can you please help me with the correct part numbers for the replacements ... (cont.)

Do you carry this handle replacement for four aluminum windows (opposite cranks). I see you carry replacement tracks that supports the round fitting.

Hello! I'm reaching out for assistance with replacing the crank handle for one of our windows. The current crank handle (please see the attached image) needs a full replacement, and the neighboring window is missing this part entirely. Could you help identify the correct part(s) and advise on ho ... (cont.)

Looking for the swivel knob for these window cranks. See photo of crank with knob, and crank without knob. I need the missing part. The mounting hole is 1/4 inch diameter. Thank you very much.

Hello, We have about 10 of these windows that we need to replace the hardware for. There are two parts. 1. Is the crank w/ arm. 2. The handle locking mechanism. The arm looks to be 9 1/4". The crank looks to be 5 1/8" in height. I'm not sure what I need and hopefully you have something in y ... (cont.)

For casement metal window in building constructed in 1936. The arm is 9 & 3/8". The arm is 3/4" wide. The mounting holes are 4 & 1/2". The manufacturer or markings of any kind.

These are for a 1959 Airstream with Hehr windows Each window has a left and right operator.

Hello, We are looking to the hardware pictured below for a residence in the Los Angeles area. Do have anything in a black or dark bronze finish that might work? Please let me know if you need additional information. Thank you

This is LH side. Looking for the replacement and measurements for the RH side

Hi. We have many casement windows in our house where the crank mechanism no longer works. I'm looking to find a suitable replacement product. I think the internal mechanisms have become stripped. Thank you.

18 inch window. I need 2 of these openers.

I'm would like to purchase a nine inch casement operator in aluminum. 39-044

Hi, I'm hoping you can help me source a replacement for a window crank and guide setup. The aluminum guide measures 13 7/8" long and 11/16" wide at the outside edges with a slot between the roller guides that measures 7/16" wide. The guide roller piece is secured to the of the mechanism arm and ... (cont.)