Wardrobe Door Guide Carpet Riser

I had carpet and now have refinished the hardwood floors that was underneath. It looks great. The closet door hardware is probably 70 years old and the 2 separate old floor guides already sat on an ugly extra little piece of wood about 5.8' thick which they had carpeted over. Now there is going to b ... (cont.)

I have an existing closet door requiring new rollers. It looks like a 3/4-inch Dia roller because 7/8-inch roller is too large for the track. It approx. 1/4 inch offset. See picture below. The diameter of the will is approx. 3/4 or 5-6/8 dia. a 78 inch dia which is too big Thx

When I measured the hardware the roller assembly seems to have a 7/8 in diameter concave wheel and one seems to be between a fourth and a half inch offset and the other one appears to be 1/8 inch offset. I took a picture of the track and as you can tell it's had many years of paint slapped on it. Th ... (cont.)

Just a quick question

The sliding bypass closet doors in my mothers house are an inch and a half thick, and the room is carpeted. Will the 23-209 work and which carpet riser goes with that ? Thank You !!!!