Viewing all customer Discussions for:

23-221 Wardrobe Door Guide Carpet Riser

I have an existing closet door requiring new rollers. It looks like a 3/4-inch Dia roller because 7/8-inch roller is too large for the track. It approx. 1/4 inch offset. See picture below. The diameter of the will is approx. 3/4 or 5-6/8 dia. a 78 inch dia which is too big Thx

When I measured the hardware the roller assembly seems to have a 7/8 in diameter concave wheel and one seems to be between a fourth and a half inch offset and the other one appears to be 1/8 inch offset. I took a picture of the track and as you can tell it's had many years of paint slapped on it. Th ... (cont.)

I had carpet and now have refinished the hardwood floors that was underneath. It looks great. The closet door hardware is probably 70 years old and the 2 separate old floor guides already sat on an ugly extra little piece of wood about 5.8' thick which they had carpeted over. Now there is going to b ... (cont.)

Just a quick question

The sliding bypass closet doors in my mothers house are an inch and a half thick, and the room is carpeted. Will the 23-209 work and which carpet riser goes with that ? Thank You !!!!

I am interested in using your one-piece closet door guides. The doors are 1 3/8" thick and are in carpeted rooms. I think I need item #23-209B. Do I need to use a carpet riser with the guide? If so, which is the best one to use with this guide? Do the holes in the carpet riser match the holes in the ... (cont.)

I replased the carpet for wood floors and now there is a gap between the floor and closet door how can i fix that gap to make the door to work again

I have sliding by-pass closet doors. They are hung on an over head rail. I need to install the bottom guides. The floor is carpeted over concrete. Do I use the carpet riser you offer (23-221)? If so, How do they attach? If not, what do I use to attach a door guide?