Viewing all customer Discussions for:

Door & Window

Can't find any numbers. From looking at videos and pictures, think these are the replacement parts: 15-259 15-255 5159 26-083 Its a double hung window.

I HAVE A AMERICAN CRAFTMAN WINDOW THAT IS NOT STAYING UP AND ON THE WINDOW THERE IS A METAL COIL THAT IS ROLL UP ON ONE END AND ALSO ON THE TOP PART TOO.

Tree in front yard fell and broke upper sash outer glass. Older certainteed window. Is it fixable or do I need to purchase a new window? I removed broken glass.

Customer Service, Need four crank handles for Kolbe circa 2006 era. See picture attached. The spline end is hinged.

These were Peachtree windows that were put in about 35 years ago. As you can see from the photos it opens out to the left. The number on the mechanism is 2081. And the wrds on the mechanism are Entry Gard TRUTH

The picture is of the opening and closing crank. This is for a Marvin window bought sometime in early to mid 1980's. The window is 141/2 in. Wide.

It is a 1/2 balance, non tilt. However none of the shown models seem to have the same top style with the hook.

visible glass in sash 24 7/16 width, 15 15/16 height Looking at window from inside: Left Balancer - 519 J76 8 92 I FOUND SWISCO PN 24-531 Right Balancer - 519 Staple deformed next two digits(maybe 3J) ??84 8 92 Are there different balancers for the left and right? Thank You for your as ... (cont.)

Trying to replace a few broken guides but cant find tue item to order

Hello, I have this as my interior of the sliding door. The bottom pull handle is on both sides (interior and exterior) the lock is only in the interior, the exterior is plain and no preset holes/marks. Do you have a compatible unit I can take the top portion get a key for exterior? Looking to purch ... (cont.)

Need 2 cranks to replace malfunctioning parts.

seeking a custom balance for the attached items.

What is the black pivoting piece called? It is for a Milgaard window. Do you carry those parts? I don't know the exact dimensions, but approximately 2 inches long. It is meant to fit into a metal channel in the frame.

Need inner and outer gasket material for casement window

Spiral Balance Series: S900 Spiral Length: 28,5" Tip Color: Red Quantity: 2

I have 2 parts that I am looking for. The roller wheel the latch and the matching thumb piece that goes with it. Will need rights and lefts

I need to order all the parts for two windows. The spring casing is 37" longThe window brand is Jeld-wen with tilt latches on the top of the window

1998 Simonton see pictures and make sure I got correct numbers. 1/2 coil S160-06. 15-191 shoe 15-150D support, which looks different.

I need the operator w this arm , says truth 30746

Windows are 1989 models and glass is 5/8" thick.