Viewing all customer Discussions for:

Door & Window

I need two of these. Both my upstairs and downstairs broke. They are the same door and it has the double locking system. The total length is 9 and 15-16.

The coil balance spring on one side of the window separated from the pivot shoe. The Window was purchased from Homedepot about 9 years ago. It looks to be an American Craftsman 50 series window. There is a number 9 on the pivot shoe as shown in the uploaded pictures. (1) Do you have the replacement ... (cont.)

AS I AM UNSURE OF WINDOW MANUFACTURE DUE TO NO MARKING ON WINDOW APPX 3/8 DEPTH TOP 2.5 INCH THANK YOU FOR ALL YOUR ASSISTANCE

Good morning,I need four 2830 sash balances for Viking metal windows. Attached are two photos each of each end (four total) plus a photo of the inscription "2830."Can you help me?RegardsPat

This latch broke that opens my window, looking to see if I can find a replacement

the marking on the top of the metal channel is: 26 4 DW CMC 10. does this mean that I need a 2640 weight?

Hi there, looking for a replacement roller

The doors are in Costa Rica. Moms house. Told her I'd see what I could find before our next visit. They are fastened with a rivet and didn't have a rivet gun with me, so didn't remove. The wheel itself was steel, but had a rubber or nylon wrap that was dry rotted and falling apart in chunks. I a ... (cont.)

Hi - I'm looking for replacement sash locks for what I think is an Alside double hung vinyl window. The underside of the existing lock is marked "J1" "8100" and "J11". Thanks!

Hello,I am looking to get replacement channel balances for 10 windows in my home. These are for Norandex windows. The metal channels are 30" long and 9/16" wide. They have a marking of 2940 BSI. The depth of the shoe is less than 1" from being worn down, but I believe it is a 15-005. I will be ... (cont.)

Can't tell if it's an Anderson or not

Hi, I'm trying to find a match for this corner screen assembly.

Hi, looking for two items. One is the track that the screen door glides on, it does pop out but cannot find out. Two, any information on the beading? the type etc.

Cranks out but not back in. Numbers are stamped on hardware in photos. Thanks Tony

Hi I need to replace the balance shoe for the silverline vinyl window built 24 years ago.

I have a 1964 10x50 trailer house manufactured by New Moon Homes. The plastic part needed is located on the left opposite side of the window crank. The shaft that it supports is 7/16 inch in diameter. I need 12 of them.

Doer handle top to bottom 9.5 in.

Hail damage to exterior glass sliding door glazing bead. Not sure what model this is and hoping you can help.

- 27" - 26-3 EMS CMC 8 (markings on the channel)

Hi, my contractor damages this glazing bead when replacing glass. Can you help us find a matching replacement? Thank you. Joyce