Viewing all customer Discussions for:

Door & Window

Hi, This is the latch to the very old sliding glass patio door we have. It is .48" wide, 1.11" deep, 3.18" tall, and 3.66" between screw holes. There's no model or serial, just the W&F MFG stamp. I'm hoping to limp along with these doors a while longer, does a replacement part exist? Thank you! ... (cont.)

Hi I need to purchase bushings to go with subject coil balance. It seems that the one you have in stock is not the same as mine in the second picture. Please let me know if this is the one. Thanks Pat

Hi there, I recently purchased 12 window channel balances and 4 window latches. I attempted to match the latch to your part number 90-075. Everything is a fit except the depth of the piece that swings in to be the lock. The 90-075 is too deep and will not close. If forced I suppose it would push the ... (cont.)

Please see red highlighted part. It measures approximately 1' by 3/4'. Please let me know what part I would need to order? Thanks

I am looking for replacement window rollers for aluminum windows that were installed by Detroit Window Company in the 70s. The company is no longer in business.

Trying to identify this window so that I can replace the latches, balances, and pivot shoes.

Notations on item: 29 5 GW CMC 7

Hi, Looking to identify the replacement shoe shown in the photos. Also, does the coil come together with the shoe, or need to be bought separately? Sash height 21-3/4", weight 10.8 lb. Thanks

The nylon rollers are 1" in diameter and 1/4" wide with a 7/32" center hole. They are held in place by a pin with a nipple on each end.

I purchased six or eight of these a year or two ago. My name is Douglas if you can find that in your files

wanted to make sure I was ordering the correct piece for our gazebo screen - all 4 corner joints are broken and we need to replace them and then the screen. Pictured is half of one broken joint. Thank You!

Hi these are Pella French style doors from 1991/92. One side of the hinge is less wide then the other

Window balancer (1984 vintage) #E47 9-27 12-82 (embossed on unit, I believe it is Andersen?) Can you provide an equivalent replacement (6 pcs)?

Hello, I have about 8 32x54 double hung windows I purchased from Home Depot, under the name American craftsman, back in 2002-2003. I am looking to replace the weather seal where both the upper and lower sashes meet and lock. The attached pictures showing the white seal is on the lower sash. I believ ... (cont.)

These are the wheels from my condo sliding glass door built around 1965. They are a mess. I believe Lumidor Roller Assembly, 1-1/2" Concave BB Wheel Product Code: 81-019 is the right match and would appreciate a review and confirmation before placing an order. Also, would 6' Sliding Door Track Cover ... (cont.)

I want to repair two of four windows. 2 take-up clips are missing 1 top sash guide is broken 1 sweep lock is broken

Metal portion is 25 inches long. I will be ordering 2 balancers.

I need to order 2 of these.

Located on top corner of sash operator appears to be a350 or351 this piece supports sash . Tops break off and operator extends all the way up I do not have installed photos

Hello my name is Jen, I am the office manager at Mitri Brothers General Contractors and Roofing. I am looking for the cranks in the pictures above. Please let me know if you can help! Thank you!