Viewing all customer Discussions for:

Door & Window

The wheel is 1 3/4 Diam 5/8 thick nylon the hub /bearing assembly is 3/4 outer diam , roughly 1/4 inner diam and 1 3/16 long i believe the door is a acorn door but no actual markings probably from the early 70s

Hope you can identify

3/8 x 1/2 is the size.

We have 3 windows of the same size. They each have 2 balance springs, 1 bottom rubber tube weather stripping and 2 wool pile weather stripping on the sides. The main spring channel is 28" long. The bottom tube weather stripping is 3/8" diameter with a channel t bottom of 34" long. The side wool pi ... (cont.)

Locking mechanism broker on our Cascade window. Need to replace. Thanks!

Looking to replace handles hardware to see what the color options you have.

I need to replace a operator cover and handle. possible number of a 1413271242831CW. Thank You!

Center to center of screws are 1-7/16", handle is about 4". I need 8 right handed handles matching style and color as close as possible. If strikes are available, please include.

I tried the Swisco 95-169 for my customer's Andersen screens. But the legs are not wide enough so the corners flop around. Do you have anything bigger that would fit an Andersen screen?

I have a few pictures of some wheels that I need. I cannot find them on your website. The white portion has some wear, so, I'm not sure what the original diameter was, but it measures slightly under 1" in diameter. It is about 1/4" thick (white portion of wheel only). it has a 8-32 threaded inser ... (cont.)

I am needing to replace the 2 side mounted window balancers. Brand is JeldWen and the stamped numbers are 38 5 it is 381 3/16 " long from metal to metal not measuring the plastic inserts

Don't see this one on your site.

Looking for a right and left complete crank system for old windows

Do you carry the replacement window crank & hardware?

home built in 2000, window channel balance says 33 3 FX CMC 4 and the metal channel measures 34 inches in length while the window weighs 30 lbs

Sizes top width 3/4" Length 2 5/8"

These are 26" spring slides with C marking and hook top. I am using your 15-236 cam shoes which are working well. The closest thing I can find to replace the spring slide is a S795-26. Will the cam that comes with the new slide work? The old slide is furrowed on the end that connects with the cam. C ... (cont.)

I need a replacement sash cam, but I don't know what size I need. The window balance size is: 27" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance - Stamp 26-3 ASIN: B005OBRP6M. Please advise, thanks

Hello, the metal lock lever on my window broke and I'm looking to replace it, however, I don't know what model to purchase. If it helps, the window has a label that says this: nfrc pol-m-001 03-m and series 8050. The lock has an 8 on it. I do not know the brand. Thank you kindly. ... (cont.)

I cannot identify the manufacturer of the window . The plastic swivel that connects to the window is broke and disconnected from the coil . I have not removed the coil as of yet until I can figure out what parts are needed .