Viewing all customer Discussions for:

Door & Window

Can You identify items pictured. I will need 2 spiral tensioners & blocks that go in the channels. Total cost with shipping to Cherry Hill NJ 08002, or or you have local distributors where I can pick up to save shipping?Frank

the screen door is used on a atrium door. the adjustment of the height of the door/force down on the roller wheels is from the side edge of the door. adjusting the philip head screw on the side rotates angle part that pushes the wheel. several of the angled pieces are broken and I would like to f ... (cont.)

Hello,I have 8 windows, mainly upper windows that parts are broken due to the quality of the parts. The lower sashes have different hinges with a sturdier part and they seem fine. I'm wondering if you have any replacement parts or any direction, advice for me. I do appreciate your time in advance. ... (cont.)

Looking for hand cranks like one in photo. It has a number stamped inside: 250-32 with a sideways 2

single hung window balance Pat. 5737877 15 1/2" )track that balance travels in is approx 5/8" deep x 1 1/4"wide. window overall height is 70.1/2". Sash weighed about 18 lb

I need the part that is on the bottom of the window that goes in the spring lift. the part is 3 inch long 1/4 wide and 3/16 high. two screws hold them on.

I need to purchase a clasp, hinge, or whatever it's called that goes at the top of your screen door to make sure your glass stays up when your screen is retracted. Mine keeps slipping and I don't have that part.Thank youChristina

It's a window that comes off

Here are the pictures you requested.

2730

9/16 x 5/16

Need two tracks for Norco casement window. Is the items that are attached to the window at the bottom. Look at the pictures and hopefully you can tell me which one you have that can be used. Thank you.

Could I get pricing for 2 channel balances?

Parts from 22 years ago. Both Pivot shoe locks broken. Not sure if need new pivot bars

Tube weatherstripping for front door. The tube part is 3/8" in diameter. Flat part that goes into track is 1/4" in length. Total measurement from base to top of tube is 5/16"

Looking for a 2 5/8" housing window latch replacement. Most of them are broken and very old. Having a tough time finding an exact match as the current ones pictured are smooth on both sides without any notches. Closest I could find on this site is the product code 26-442 truth tilt window latch, wou ... (cont.)

Hi there, I'm having some trouble finding this piece that houses two coils one stamped 406 (bottom) and the other 407 (top), could you help me identify what I am needing please? Thank you

I am looking for replacement TRUTH Casement Window Operators. I took one off and it has part number "45034-LH" on the casting. It is the same as the picture earlier in this Thread. The arm is close to 9.5 inches. I will need both left and right devices. I assume that is what the LH stands for in the ... (cont.)

The window on the left is missing the lower strip of plastic along the edge of the sill (glazing bead?). When it rains, water comes in. The only window markings I can find are Malta 98-2. Can you help me identify the missing part and describe its installation? Thanks.

We are in need of this pictured patch for a storm door window that slides up and down to reveal the screen part Of the door The white part is top of the right side of the window that rides in the channel of the window. Has a screen that goes through it to anchor it The metal piece with the spring ... (cont.)