Viewing all customer Discussions for:

Door & Window

I find one kit that might work but the pins are nylon. This is going to repair a heavier storm door hinge that had metal pins, nylon bushings and a spring. I don't have an actual photo of installed due to the door being ripped off from 60 mph wind gust and the door wasn't latched fully. Most of the ... (cont.)

The items you have appear to be similar but not quite the same dimensions. Blade length for example, 1 3/8 in vs 1 5/8 in. I suppose the one you have may work.

need replacement rollers. Access to adjustment screw is from in the house. Middle hole in the pictured part.

I need this part for a Stanley 2004 single hung window

The left window balance broke. The coil snapped and wound up as you can see. I need your advice on what to get to replace. It appears in my window the coil is directly screwed into the window. No housing for the coil.

Thank you for helping identify the correct part.

Cardoco brand. Don't know what is called the black plastic peice broke

Window has GA on it.

4 left 4 right tilt latches 2 balance striker prices that screw ro bottom sash and go into balances

Do you carry these replacements ?

Hello, The sliding glass door handle is cracked and even when in the locked position, if you pull hard enough, the door will open. Based on the pictures, can a replacement part be identified? Thank you!

I've. Looked everywhere for these. Harvey doesn't carry them anymore.

I need to replace the store wall lor the knob that turns the latch as it answered as broken period can you identify this lock part number question markDan DJMAC BUILDING SERVICES

I need two of each

I need a channel balance part# 2630 i also need sash guides

I am looking for screen retainers. My grandson liked to crawl out of my windows while playing hide and seek and lost them,

white tilt latch 3 1/2 in long, 3/4 in wide, 2 3/8 between mounting tabs, thumb slide near the rear.

Daphne

I have a number of wood frame double hung Weather Shield windows which were installed in 1992 as part of a home addition. They are holding up well, but a few have broken track slide mechanisms which I'd like to replace. The slides are made of white metal and are fairly ingenious in that they lock t ... (cont.)

I have two 36x53 and 27x53 vinyl double hung windows and the plastic htdware to open and close and tilt the windows is broken. The sash line is still good. I just need the plastic hardware.