Viewing all customer Discussions for:

Door & Window

Is there such a thing as a plug to put at the bottom of my outside door where my pile weather stripping slides into so that it doesn't drop to the bottom and drag? Right now I tapped it but was wondering if there was another solution?

I would appreciate your assistance. I am not the original owner of my unit. I do not see any labels on the windows. Instead I see the word FIBERLUX imbedded on the window. On two of the windows I see the numbers 89-3 and on the other windows number 90-4. Am assuming those numbers are the window ... (cont.)

I need new window tilt latches for series 7000/7001 vinyl windows. I also need the guides in the track that the tilt latches ride up when you open the window. As you can see I can put my finger through the existing guide. Thanks for any help you could provide.

Hello I need help identifying the parts in the photos. The coil spring balance has a 6 or 9 on the spring,see photo. A total of 10 assemblies needed . The the other type have 14B stamped on. 16 needed. In both cases I am assuming right and left are the same part. Thank you

Casement window lock

Hi: looking for this corner bracket for a Simonton screen door. Can't tell if roller is integral to the bracket or separate. I would like to know part number and if you carry it for both bracket and roller. Are there any alternatives if you don't carry it? Bracket is 3" long, 3/4"wide and 1 3/4"t ... (cont.)

Good morning. I need help find the plastic strip running inside of my Brookfield cabinet that holds the pull out shelf. Is this something you carry? Roughly 20in tall. Also the small mounting piece shown which connects to cabinet. Thanks Andrew

Channel Balance Series: S395 Channel Length: 27.5" Channel Stamp: 2740 Quantity: 2

Hi, we have double hung wood windows in a 1950s ranch. No identifying marks that I can find. The balances seem to be just a plastic tube with a spring inside, screwed to the sash at the top and the bottom of the window itself. We would like to replace them with something better, if possible. What ki ... (cont.)

Hoping you can help me identify this operator for a bay window probably from the 1970s. There's no part number on any of the hardware except for an eagle on the tip of the handle. The arm length is about 12 inches long with a plastic roller on the end. I need two of these.

Chanel longs (metal) part is 15'' Inches . I need 1 only.

The stamp says 21 4 Caldwell JM. It is 22" long. 1/2" wide. And the shoe looks to be 1 3/32".

Looking for any help regarding replacement pivot bars as per images attached.

I have 3 panel glass spider on back porch. I replaced wheels couple years ago. Now I found flat spot in track rail causing door to stick. Need help seeing if I can replace

I have MW vinyl windows ca. 1998. Some of the little rotating cams have disintegrated so the tilt no longer works. Pictures attached. Can you recommend a fix? Let me know what measurements you need for a retrofit if that is the option. Thank you.

I believe it is called a balancer? One on each side of the window sash. Window sash weight 18.6 lbs. 26 inch metal 1/2 inch wide

Looking for casement window lock identical to pictures. Please let me know of any questions.

Swisco Needed the bottom rollers for a Stanley Double Glass sliding patio door. 60 x 80" Low E,

I need the tilt window latches for my windows. I will need them for 2 separate windows Thanks

Hi, I have three windows that have loose string coming out the side and this piece was completely broken. I am unsure what replacement parts I need.