Viewing all customer Discussions for:

Door & Window

Hello, hope you can. help I need replacements for these plastic parts of the window that is broken. They seem to connect to the spring on the top with a hook and then have this circle cut out on the bottom where the window connect to. ANy help will be appreciated I really don't want to replace the ... (cont.)

Please help me identify the replacement part(s) for attached photos. I believe my part is a 409 series 170 coil. There is a stamp on the broken coil which reads '409'. Please confirm

I need this part. Was from a pgt casement. Top

looking for a replacement lockset for this door. No visible manufacturer or part numbers The handle has a 4" spread and the insert is 3 3/4" spread. The door catch is has a 3 1/2 " spread. Thank you in advance. Duncan

Hi, I recently ordered replacement channel balance, and the clips at the top look different. It looks like the existing balances are clipped into the holes at the top, but the new ones look like they need to be screwed in. I was hoping someone could provide some advice as to how I install the new ... (cont.)

I'm looking for replacement window springs for a "Pella" window. Can you help me?Attached is a picture showing a number I noticed on a spring I pulled out. Hope this helps. ThanksMike

This is from Alside windows we purchased in 2009. It is the stripping that goes between the window and the screen. base is 2/16": height is 5/16'

Balance Length: 43.5 Balance Stamp: Go 43-45 Balance Color: gray Quantity: 16

I'm looking to identify this hardware for a removable window on porch.

The spindle shaft of the crank mechanism of our Uniframe garden window has failed and will not re-engage. Company(Great Lakes Window) no longer carries the part. Recommended contacting Swisco for replacement. No parts stickers on window unit. Only part numbers located were Truth (hardware?) 40575 ... (cont.)

I need to identify this hardware for my window sink. The crank and handle is broken for both of my windows.

Looking for compatible window balance. Forgot to take a picture, but the top connector is a hook that connects to a hole in the frame

Window limiters use on a casement windows

I need to replace the top and bottom bracket, but don't know the part number and it's an older door.

Attached is a photo of a caswment operator that I need to replace. Part #30841L is stamped on the hinged arm. What can you recommend as a replacement. Thanks, Mike

CORNER KEY FOR A SCREEN. NO MITRE W/ FLANGE

Ladies and Gentlemen: I have 6 KK casement windows with the above cranks. Four on the righthand side and two on the left. Several of them no longer function - they open but the screw mechanism appears to be stripped and will not close. Please let me know if you have replacement parts. Also, if ... (cont.)

i need ballancers 30" long , 1/2" wide but the sash weight is 61Lbs. could you help me on the number of ballancer i need

Think that's what this plastic piece is called. 1/2" wide. Flat surface. From Keller windows circa 1996. Please point me to new as some current is leaking. Thank you.

Is there such a thing as a plug to put at the bottom of my outside door where my pile weather stripping slides into so that it doesn't drop to the bottom and drag? Right now I tapped it but was wondering if there was another solution?