Viewing all customer Discussions for:

Door & Window

Good afternoon, I have been looking all over for replacement coil assembly but have not been able to find an exact match. Do you happen to know or have a replacement available for this? I can provide dimensions if needed. Thanks.

Hi, purchased a mirror sliding door at Menards a while back, and the bottom door guide broke, is your part compatible? https://www.swisco.com/Bottom-Guide/pd/Sliding-Closet-Door-Rollers_Guides/23-026

Spring is broken as well as the bar that holds the spring at the top. Length measuring only metal = 20 7/8"; width is 1/2". Markings on metal are "20 C" and "B.S.I.". Please advise on which balance I should be ordering. Thank you.

Hello, I am trying to find a replacement for a Truth hardware awning window operator. I have several photos of the operator, and I can confirm that the arms had the numbers 41010A close to the crank, and 31881 on one of the arms. The opening for the operator in the sill is about 4 5/6" or thereabout ... (cont.)

Hi, I have an inside sliding door handle that is similar to, if not the same as, model 82-081. The handle piece is coming loose from the piece that sits against the door, the part with the screw. I have tried pushing the handle tight against the piece that sits against the door and tightening the sc ... (cont.)

Channel Balance Series: S385 Channel Length: 22 3/8 Channel Stamp: 22-3 Quantity: 2

These clips hold the window screen in place, I've looked everywhere and went to both big box stores. I need your expertise please help

I am looking to identify sliding glass door wheels. I have attached pictures of them. Thank you!

I am lookin for the coil balance and shoe for this tandem balance application. Not sure on the end tab compared to what you show in the catalog for this type balance. Coil is stamped 8 . What other info would you need to help me on this? my tech only brought the lower half of the double coil. Will I ... (cont.)

Looking to have this balance identified as well as created if it's custom.

Need 2. 12-1 unique 33-C-30 Need 2. Plastic side window lock Left and right

Stamped number is 261

I need to find the track posts for a non tilt 2-slider window that was installed by magic window in 1999. My husband took the one from the left side and put it on the right side so it will close. So I need the whole assembly that attaches to the side and the top of the window sash frame. ... (cont.)

I don't know the name or number . so sorry

I have this screen door that the corners are broken or cracked and need to replace. I have no idea the brand name of the doors the builder installed. I've attached pictures of the corners that need to be replaced if you can help identify the corners so I can replace them it would be much appreciate ... (cont.)

In need of 2 SH window balancers marked 21 B

Part#2265 US Patent #5125706 D840398 Sash Controls Canton, SD

Looking for replacement lifts .it's a non tilt hurricane window it's heavy the number ' s at the top say 25-49 I'm guess that means 25lb 49" it's a white tube 5/8"

Please let me know what I need to make this repair

I have American windows I purchased in 2000 . looking for weather stripping to replace. The felt that goes all the way around window Thanks