Viewing all customer Discussions for:

Door & Window

32 9/16" 3240 Atrium 2003-2004 4 each

The plastic corners in my white aluminum frames are 1" square with 9/16" or 5/8" tabs that push into the frame. I'm reluctant to take the the frame apart without repair parts. Is this enough information to identify the corners and the pull tabs?z

Hello - I have a 7 bay window with 2 windows on the each outer edge that crank open. On one of the windows, the 3 screws came out of the control arm. However, the screws won't stay in if you screw them back in. It seems there is nothing behind the holes on the window to keep the screws from comin ... (cont.)

The plastic ends are broke on them , but rather than drill and replace I think it would be easier to replace complete What a handsome group of individuals !!

Good Afternoon, This is Big River Glass. I am reaching out to see if you stock a vinyl bead that would match the attached pictures. I need the stops in champagne color. Please let me know if you have any other questions and or need any other pictures. Thanks in advance. Thank you ... (cont.)

Disco,Requesting part number identification for a 32" block and tackle sash balance. Part is stamped "32B" and appears to align best with your part number 795 part (32B). Thank you for your time and effort!Brad

Hello! I was wondering if you could help me identify which balance shoe I need?!

pella window:Model # IMPERVIA SINGLE HUNG M0130044752 NFRC AUG 25,I attached the photo's, one of them has the measurement,2930 is stamped on itI need two channel balance.Thank you,Frank

Milgard sliding window, single hung, channel guides are broken.

Looking for replacement Pivot Lock Shoes but most of them r saying that r over a inch wide but mine is just under 1 inch

truth hardware anderberg mfg. Need the turning mechanisms for the inside and the turning handle.

80's vinyl sliding windows, no manufacturer or part # evident. Guides slide in fixed track to open and close and use spring loaded pins in component to remove/swing out for cleaning. Plastic components are starting to get brittle and break. Attached pictures show dimensions and pieces from all side ... (cont.)

I purchased these parts from you a while back but can not find them again. This oil support holder and coil pivot attachment is for a tilt out to remove window. I purchased around 40 before to replace on my windows and am looking for more. I can not find them again on your site.

I need to identify what balances to buy. Balance is 28 3/4 inch long

I believe this is a Truth part number 32613. Is there a replacement available?

Good afternoon, I am looking for an equal to or equivalent replacement retaining aluminum screen latch for a screen window. These latches are positioned 1/4 from the top of the screen, one on each side. Thank you for any assistance you can provide. Regards, Jim

Left side of my window sash dropped it is stamped on the back 26 3 JN Caldwell. do you have this part and do I need to replaced both sides ?

Hello. Handle has broken off. Would follow your advice for purchase of either just a new handle and hardware or entire new latching mechanism. I see AW which might be a brand and numbers 2573558 and 7700-14.Thank you.Dan

I have casement style windows next to my double glass doors. They open with a handle/lever that also operates the lock. The lever popped out in my hand. Do you have something that will work instead?

Can I possibly get this roller # 00- 5400