Viewing all customer Discussions for:

Door & Window

On the inside of one of the handles it says "Roll Screen R.D.1991" Above that are the number 40643.

Hi,The metal insert at the shoe where the window pivot pin sits is broken. I did not find any markings on the piece. The tip on the balance was red in color.The window in question is the upper sash of a tilt-in double hung window.I appreciate any guidance.Thank you,Bill

Hello, I would like to place an order for the following, please provide lead time: Sash Balance-complete with clip on the end/37 length, 65lb / qty.4 Sash Balance -complete with clip on the end/ 25 length, 65lb / qty.2 Window lock "keeper" - qty.6 (see attach photo)

This is and L shape with theards on one end that a spring and nut attach to hold the screen tight to the frame . Push in and turn 1/4 turn to open.

CAN YOU TELL ME IF THIS "CAM" OR "BRAKE SHOE" PART IS AVAILABLE. IT IS FOR A DOUBLE HUNG WINDOW. THANKS IN ADVANCE

IS THIS PART AVAILABLE THROUGH SWISCO? THANKS IN ADVANCE!

Hello, I'm looking for replacement parts for this mechanism: - Anderson Window - Awning Window - Worm gear broke, crank missing. - Plastic cover is cracked - Original parts from 1970's or 80's Aside from the crank/gears, the rest of the window hardware is in good shape. Please let me know what I ... (cont.)

Window lock back plate is 3" , screw holes are 2 3/8 center to center . The window crank is 8 1/2 " to the long side touching the gear . It has 4 screw hole , 2 on each side of crank , screwing into small blocks located in the window frame

I need few of left and few of right swing with dual arm as in photos.

Lookin for replacement window tracks. Stamped number on current track is K 23HD

Please provide a part number and price for the attached pictures. The rollers are 1 1/4" Please let me know if you need anything further.

Please let me know if you have a replacement for this assembly looking for both sides coil says 7S on it dimensions are listed on the item pics also need the pivot arm

I'm wondering what is the best removal technique to remove the window sash with the 15-087? As once you tilt the window towards you, the sash pivots lock into position and I'm unable to twist the sash for removal. With the 15-087, you are unable to simply pop one side upwards. The springs(s180), al ... (cont.)

I have several windows with broken handles. Having a hard time finding replacement parts. Any suggestions? Thank you!

Hello Ive got a customer that had windows replaced and has a couple pivot bars broken . I have been trying to find part number but no luck

Hello, I would like to purchase new window balances for my windows. I was told that they are 27" balancers but I dont know what exact balancers I need to purchase. Hopefully the pictures provide clarity regarding this and I appreciate any direction that you can give. Thank you for your help. ... (cont.)

Hello! I have this bracket in the back from our 1980ish kitchen. I tried measuring but it's hard to reach back there. It's roughly 5inches and the rail it needs to hold is 1inch. Thank you!!

Hello. The only marking found that was engraved onto the side of the balancer is "31 5".

I don't know what parts I need can you help me.

Need part crank is broken