Viewing all customer Discussions for:

Door & Window

I am looking for a keeper that will work with the latch in the picture.

I need the mechanism that rolls out the window. The crank I have works fine I just need the rest of it. It's a caradco awning window. Ty

Non tilt windows need 6 balances, they measure 24" x 1/2 inch. However, most of your website pictures look similar, without measurements, so I'm unsure which model to order.

May be Pella. Stamped # on bottom 30746.

I have three sizes to replace. Please see photos of stamps on all three. The metal channel lengths are 15.5", 27.5" and 30.5" respectively. All three have the same top and bottom plastic fittings.

Can you tell me which series numbers are needed for the parts I identified? I believe the windows were manufactured by MI.

Trying to find out which rollers are for my Pella sliding door. The sliding door window says the following: Pella IGCC BA IGMAC INSULSHIELD CIG-2 3 02

I noticed when I tried to remove the roller it's on a pivot point and no screws to remove from that pivot point. I removed the adjustment screw and a secondary screw from the front. I don't know the manufacturer of the doors and the house was built in 1997 in Orlando Florida. Each glass door has one ... (cont.)

Looking for help in identifying these internal replacement window sash latches. I've attached 2 photos of the broken latches. The internal length is 2-5/8" The internal width is 5/8" These measurements fit inside the upper sash frame. I've added a pic of the only identifiable mfg. Clue as well. L ... (cont.)

Im looking for one right and one left replacement. Thank you.

Assembly if 5/8" wide, 2 3/4" Long, 1 5/8" high, and wheel diameter is 1.25". Door dates from the 60's

I can't seem to find the same part for this particular window. The original window roller, the wheels are worn and cracked. I want to find out if I can replace the wheels with a different material. Thank you!

Looks like all 4 are the same

Hope upon can help with my window latches. The photos depict one glued for photo purposes , one showing the portion broken off that seeds into the other window channel, and the last one with measurements hopefully accurate.

photo 1-shows top hinge with missing pinphoto 2-second hinge with part still intactphoto 3-broken hinge viewed from the inside-storn door open.Thanks!!!!!!!! Bob

Milgard windows installed in 2005

Attached are images from Caradco windows that require parts to repair. Pivet shoes that have the measurements on the images and I believe the primary measurement is the thickness at 3/8" for the broken pivet shoe. I also need cam pivet bars that attach to the bottom sashes of these windows and loo ... (cont.)

2002 double coil balancer

I need help identifying these two pieces on my sliding glass door. Red arrow: plastic weather stripping Blue arrow: plastic rail guide. I'm missing this piece on my other sliding glass door.

I have an Andersen storm door (model 2000 I believe) that has the useless plastic retaining strips that are a bitch to get in. Do you sell an alternative? Clips would be fine even if I need to drill a hole. Thanks. This is the end profile of the retaining piece but im not looking to replace t ... (cont.)