Viewing all customer Discussions for:

Door & Window

Hello. I am having trouble identifying the correct window balancers to order.

I'm looking to replace 4 window channel balances they have 3240 stamped on them and measure 33 inches. I want to make sure I order the correct part.

looking for a milgard awning crank

Number 23-3. J. Stamped onto part. Metal portion without plastic ends 24" long. Need 4 total.

I'm trying to track down the correct replacement channel balance for this. channel is 30" long and 1/2" wide. the stamp says h 29-3 but i couldn't find a matching one in the list

As shown in pictures.

Hi, I need to replace the window part shown. Original numbers on the part are D-198202us. RD 1963 Can 11500-3 2 R.H. I spoke one of your colleagues at Swiss o and he told me this is not your part but you may be able to recommend a suitable replacement. Thanks

Do you have any of these for sale?

So these shoes are 3/8" x 1" x 2". I ordered the 15-045 and apparently to bar does not fit into the pivot shoe. It is 1/4". The opening aon the actual is larger. So i need something differnent so the shoe will accept the bar. The bat on existing is 1/4" but does not fit into the 15-045. It is 3 1/4" ... (cont.)

Trying to find replacement part

The channel balances had come loose and were sitting at the bottom of the window on each side of the window frame so a picture of them "installed" was not possible. The measured length of the metal portion was 30"

Does that clip help it from going side to side? Because I'm missing a couple of them in each window.

Can you tell me if you have cranks that replace the broken ones. The two with white paint on base are for long Bay windows, all are casement windows.

Hello, I have a 30 year old heavy aluminum tempered glass patio door with damaged rollers. The rollers are made of steel with 1.25 inch wheel diameter. There is a roller with one wheel on each side of the door. The dimensions of the housing is 2.25 by 1.25 inches, 3/8 inches thick. There is a recta ... (cont.)

american craftsman 70 series, what type of balance coil support are those?

Attached are the photos of the window parts I need. These windows are probably from the early 1980's aluminum windows. Plastic car slides into the window channel and screws in with metal wheels. The plastic car is 11/16" wide x 1-7/8" long, The thickness from the bottom of the groove that catches in ... (cont.)

I have a double glass sliding door (both sides can slide). The handles have JW imbossed it them (see pic). One of the levers to lock the door (from the inside - there is no key from the outside) is broken off. I could not re-attach this lever back as shown in the 2nd pic. I can put back the leve ... (cont.)

Hole-to-hole (screw spacing): ~6.5 inches Total plate length: ~7 inches

I don't know what type of keeper that is similar

Is there a way to replace this worn out rail for an aluminum patio door? Looks like its about 3/16" wide and I will need about 6 feet of rail.