Viewing all customer Discussions for:

Door & Window

gear broken

Hello, I figure Id at least give it a try,as I cannot locate this part anywhere. Its from a sliding glass door in a 1971 Florida built home. Any assistance would be greatly appreciated. Thanks for your time.

Hello,I need a new Screen door lock replacement. Attached are pictures of the existing lock. Measurements are as followsOverall: 4" X 2" X 1/2 "The screw spread is 3"I hope you have a replacement lock or can recommend one. This screen door is 30 years old.Thank you for your assistance.Beth ... (cont.)

It's the top slider but I can't find a replacement since the mounting hole is worn out

I need a left and a right window tilt latch. It has 3B inside the bottom piece amd it has either a 30 or 50 on the latch part. Any help would be greatly appreciated.

I need help identifying this parts I don't see any number the the white plate in the picture is suppose to secure the band in the rail. I'm not sure how many springs there are suppose to me

Here is a picture of our current crank and what we purchased. The ball connector comes from the top on our current crank and on the bottom in Swisco crank. Will the Swisco crank still work? Thank you!

I was trying to adjust a height of Glass Sliding door roller which was seized. After several attempts by Dry Lubrication Spray, finally I was able to turn. I inserted about 1/4 inch thin wood to lift Door frame, but it does not change the roller height. If I take out a screw ,is it easy to put a new ... (cont.)

The crank handle has disengaged from the lever controlling the opening louvers. It looks like pin has sheared off. Also plastic clips have become brittle and broken off. Rubber seals have hardened and become ineffective. Basically a renovation job which I can do is now in order as long as I get the ... (cont.)

I don't know the type of door and I can give you dimensions of everything but the post that is broken off if it will help. Total length is 1 1/2", Thickness is 1/8". Height is 3/16". Let me know if you need anything else. Vickie

There are no numbers on the crank but the window had a sticker that said Lawson Industries, Inc. ATW-1161 awning windows.

Hello, I am in search of where to find these clips. Or something similar. Thanks

Nuprime latch - left slider window that latches onto left vertical frame - squeeze release latch

Looking to identify the Channel Balance, it is stamped 27C and uses the pivot type in picture. Thanks

no markings or numbers located. I did find a simular shoe on your site but I wanted to be sure it is the correct shoe.

41011 on the long arm. 41008 and 31876 on the other 2 arm components.Hope this helps.Thanks

Need the mortise for the 82-030 handles

I need to place an order for S795 channel balances with the hook attached. The specific quantity is ten (10) S795-27E and two (2) S795-21G. Please process a material part number so I may execute and the order as soon as possible. Thank you.

seems to be about 5/8 of an inch wide and 2-1/4 inch long (not including the part that extends out into the aisle). It's quite small and I've had trouble finding something to meet these specs

Hi Please see photos of the balancer we are trying to locate, or if there is a viable replacement alternative that will work. Please notify me as soon as possible if there are any remedies you can think of.