Viewing all customer Discussions for:

Door & Window

The part I need is missing on the window actually, but I am also including the picture of the opposite window for reference of what I need. Please let me know which part I should need. It's an Anderson window and has the 4 1/2" crank and I need the part that the bottom window hinge attaches to. It's ... (cont.)

bottom rail is 3" wide will adjust length

I need a replacement slider for a Merillat cabinet drawer as shown in pics. The slider wheel is worn out. Thanks

Can you help me order the correct balances for two different windows? I have identified the two as SM and LG. I have additional photos, but I was limited to 5 photos.

i cant find this part :-(

The adjustment screw for my sliding glass door doesn't fit a Phillips screwdriver. it looks like it takes some kind of tool with 4 equal flanges. Do you have any suggestions? Thanks, Richard

Hello, Id like to confirm the parts needed before ordering.Please check my attached photos and dimensions so I can order the proper Channel Balance and clips. thanks for your help Ken

I know it's not a great photo and hopefully you can narrow it down to a near match. Please help!

Window was installed in 1998. 3 screws, 5 inches between screw holes next to drywall

I think I need a pair of your Part # 81-162, because it looks very similar, has the right dimensions, and it has a 1-1/2" plastic wheel.

I have American craftsman silver line model, 1200 windows and it looks like the balance spring has broken. Can you help me identify this for the replacement part and how to get it out? Thank you for your help.

I need two balancers. Looks like 27" long Please see photos

Good morning, I have an older patio door locking system with the interior door handle broken at the bottom. The only markings inside the lock is "Made in New Zeiland". The previous owner used an epoxy at the bottom because the screw mount broke. I need to replace the system but I'm not sure of th ... (cont.)

Need to replace the glass on the operating door

I need balances for upper and lower sash. I think the windows are jeld wed but not positive

As shown on picture I am looking for replacement of a tilting window "hinge"Thank.Claude

Looking for a white tilt latch 2 1/4 long x 1 1/4 wide approx 1/4 height.

Trying to find replacement balancers for Anderson double hung window measuring 28x37 height ..widow original 1993

Attached pix show a window that will not stay up. Its partner window works fine. I would like to know if you can match the spring cartridges from the pix. There are no markings or brand names visible anywhere. These windows are original construction from around 2004. I would need two spring units, o ... (cont.)

Hi, Do you have any suggestions for a new track & pin system to work with existing Leigh bifold doors? My neighbors keep getting rid of their doors and not putting out the tracks with them! I painted one set and had something that kinda worked, but with limited bottom supports and the disk tops a ... (cont.)