Viewing all customer Discussions for:

Door & Window

need roller to replace Massoud & Bros. Co. part # 1137

the patio door itself is 35 1/8" X 77 1/4" The glass is 30 3/16" X 72 9/16" The patio was new in 2022. I hope if you can tell me who made it I think the windows were made by the same company. Thanks for your help.

looking for interior handle. it connects to the mountig base with m4x20 machine screws letters stamped on inside read made in new zealandthe part im looking for is 6 & 3/4 inches long one inch wide mounting holes are 5 &3/4 inches apart center to center studs are 4 & 7/8 inches apart wi ... (cont.)

I replaced the IGU and I need 4 6ft pieces

Can you help confirm this part type I need? Thank you!

Hello, I'm looking to replace the lock cylinder on my mother in laws storm door. Can you point me in the right direction? Thanks in advance! Bill

They measure 23 1/4 in length by half inch by half inch

Metal measure 26 1/2 " Stamp 26 4 oj BSI

Coil Balance Series: S180 Sash Weight: Coil Stamp: 10 pound Quantity: 8 Needs to be 42 inches long.

We have Gorell windows. On one lower window, the coil spring on each side seems to have broken. (See photos). It has also slammed down hard a few times causing the right corner to separate. The right bottom corner feels loose. (See photo). I would like to purchase the replacement parts and ma ... (cont.)

This is a General Aluminum non-tilt window with spiral balances. I've read through the information on your site, but there seems to be a clip blocking access to the spiral. How do I adjust or replace this balance?

The hold in the glass for commercial storefronts.

My sliding glass door lock doesn't work. Please help.11 3/4 inches-tip to tip; 3/4 inches wide Lock doesn't engage, so I would need the locking mechanism, handles and corresponding multipoint keeper. There are no identifying marks or names. Thank you,Cora

I need help looking for a stop for the window angel lock. Attached are pictures of the item and window model. Please let me know if you have any questions. Thank you.

Hi,Could you help me and see if you have the part per photo attached in sto k? The stamp on the coil reads 5K

Swing door

My crank recently broke. There is writing on the inside that reads "2121 R1". Can you help me find the correct replacement part? Thank you in advance.

30 . 5. inch spiral balance.

Looking for balancer, shash guides ( black preferably, and take out clips. What is your delivery time ?

Looking for a balancer for assumed Milguard single hung 3046 window Balancer number 23 4 JO CALDWELL Metal 24" 5/8 wide simple winged components