Viewing all customer Discussions for:

Door & Window

I would like to completely replace all 4 handles, or if possible just the outside handles with something that actually has a handle on it that is not recessed (like the inside). I am willing to replace all four and the lock if necessary. The active lock side is the door on the right (when facing out ... (cont.)

Hi, Do you carry a latch that looks like this one?

Good morning, I would like to replace my existing handle set with your locking set on my brand new Pella 150 series door. I believe I know which handle set will work. My question is, do I also need to replace the mortise lock, since it is new? Or is your handle compatible? Thanks, Roger ... (cont.)

I recently moved into a house that has 2 broken casement window cranks. There is no indication of the manufacturer for the parts.

Looking for Milestone Series 2000 single hung bottom weather stripping

do you have something like this? pulley balancer for bottom half of a double hung window.

Looking for new / larger interior seals. The seals were never big enough to fully seal the window. The seal pushes in with flexible wings then floats in the slot. See pictures for seal and approximate dimensions. Thanks

First photo shows the window with the locking mechanism. The second photo is the window that is missing a piece of the locking mechanism. The window that is missing the part hinges on the right. This is a Plygem 1500 casement window

Does it matter whether I have a right or left facing handle when ordering this product? My door opens to the left.

Hello, I have several windows with this broken locking mechanism. I need to know if you supply this part. What other information can I send?Jake

Do you have frameless sliding shower door hangers?

Hello could you please let me know what rods should I Order ?

The length is 25 3/4 for just the metal part The width is 5/8 The metal stamping is 25DS 42

I need both right & left side window balances for my Milgard window. One of them has a broken clip/hook. I have attached pictures of the window balance. Let me know what else I need to be provide. Thank you Cindy

I was hoping you could help me identify and get replacements for these storm window latches. I couldn't get the photos to work on the website. This is from a storm window on a screen door on a double wide trailer I am not sure of the brand. The dimensions are 3 3/4" long 3/4" tall at the spring catc ... (cont.)

This piece of window trim has popped out and I was wondering if you new the correct piece for me to order to replace it.

side adjust tandem rollers for Window Master wood patio doors Circa '87

Hello, I have a Stanley brand double-hung vinyl window with broken pivot shoes and a missing tilt latch. Can you help identify them? I believe the upper part of the pivot shoe is broken off and missing. After looking again the pivot lock shoe I found matching is 15-195. Still not sure about the til ... (cont.)

I am in of a replacement lock (and matching keeper) for a Simonton sliding glass door, circa 2014. Photos show the current lock mechanism which has failed, the current keeper and the handle. I have confirmed the mounting screws at the top and bottom of the lock are 11" apart. I am hoping I can ... (cont.)

Where can I find Parts for slides of a vinyl windows in Everett Washington? Earl