Viewing all customer Discussions for:

Door & Window

We are looking for the thin piece not the one with the latch on it. Picture 3137 shows the piece sitting up, the second picture 3136 is with the piece laying down flat.

I have Hayfield 701 windows put in in 2013. Need cover and crank. Will the 39-107FK work on these windows?

Looking for a replacement for this window lock/latch. Please assist with the best possible match, Thank you!

Needing a new morticed sliding door lock, ours has a worn out pin preventing it from locking. Side One: DEC 09 Side Two: PAT#6.264.252 PAT#5.820.170

Window balance 2730 A

Need replacement

Please see the attached pictures, 28" length. Marking says 27 14L. Need 2 as both have broken.

Can you please help me find the part I need?

I have two different sized windows. 18" and 22"

Hello, I am planning to replace the worn out vinyl glazing beads on my windows. I'm not sure of the manufacturer of the windows. What measurements/information do I need, to find a replacement bead that is compatible with my windows? Thanks Tim

In need of a new lock. The door is 1" thick.

I need to replace a double hook mortise lock and handle, and rollers for a Milgard SGD-C30-96X96 5621/5631 series sliding door. Which would be the best replacement parts and/or sets for this? Please advise.

Need about 4 of these replaced.

I am looking at the locking part for a Empire Pacific handle

Hello I would appreciate a price for the pivot pins, see photo below Thank you

I need a drawer track back plate that looks like this that accepts 1 1/4 inch track. I couldn't locate the dimensions easily on this one. Does this one match that size or do you have a product that does? Product Code: 32-014 Note this photo with measurements:

I'm confused on the length of the metal on the slide I measured 21 1/2 inches I cannot find 21 1/2 online only 21 or 22, so which one should I use the Parts number on the slide say? 2120 with a backwards B

This is the set of vinyl window sash guides I will need, The window weighs approx. 17 lbs.

1 and quarter inch wheel

Roller for Swisco 5GD-R25 2 1/2" long, including tab 1 1/2" high, including roller sticking out 1/2" wide Doesn't match those posted on your Web site. Thanks for your help.