Viewing all customer Discussions for:

Door & Window

Looking to replace this handle set

I am needing help locating this part for a tilt in window

Hello! We have Lincoln windows throughout our home - 20 identical handles and mechanism covers as shown in photos. The handles do not fold and obstruct the window shades. We would like to replace them all with a folding handle that will allow us to lower our shades completely. The current handles ha ... (cont.)

Hatteras Yachts used a bronze/brass 1" wide track for their slide pilot doors during the 1970's and early 1980's. The material is 1/32" thick, 1" wide and available in 80" lengths. (Pictures area attached).I am in a restore/refit project and am searching for this profile. Any help or leads would be ... (cont.)

The casement latch is broken in the closed position. The latch handle inside the house freely moves up and down without opening or engaging the slider bar. Here are some photographs of the internals from a window that still works. You can see the metal catches on the window itself. These come int ... (cont.)

The only marking is the Harvey logo on the sash locks.

I am looking for a replacement opener mechanism for this Pozzi window, please advise which part you would recommend Thank you!

I have to rebuild a few screens that come out from the inside. The top corners match the corners 95-264. They have a lock feature and a pin stop on the outside of the corner. I'm having trouble finding the bottom corners. Like the top corners they have the pin stop on the outside, but there is no lo ... (cont.)

Trying to ID window manufacturer. Windows are: -Double Hung, panes can tilt out for cleaning -Single Pane, with storms -No markings or stickers -Spring balance -Pivot shoes are in first pic

I have 3 windows I need parts for . They have a left and right opening window on them, I need 6 latches , 3 left hand openers and 3 right hand, hope the pictures help

Markings found on window balance Pat 5353548.

I need to purchase 2 sets of these wheels. Do the pictures give enough info to match a replacement?

Need help finding correct parts, do you have this??

I am looking for 8No Stanley 4050 top guides with the triple guide wheels. Is this something you can supply and if so at what cost.RegardsDerek

Need some help, I don't see my roller on your site. Do you have anything you can recommend?

81-154 looks very similar to my roller but would like confirmation please.

I have Amerimax sliding window and the lock assembly has jammed up and will not operate. I'm looking to get a replacement for it. Can you assist me in doing this?

Measurements are provided in the pictures to make sure I did them correctly. I measured the "width" at 3/4 of an inch, "height" at slightly over 1 inch and 1/8th, and the width of the single steel ball bearing wheel is 1 and 1/4 inch. Is it possible to upgrade my rollers to double wheels and will ... (cont.)

I need to of them

Replacement block and Tackle rods for tilt in windows