Viewing all customer Discussions for:

Door & Window

I have questions if I need replace the entire springs or just the shoes. And I would like confirm the model what I need. Thank you.

I have more pictures if required. Please let me know if you need a different angle.

Replacing window balance channels

There is not color at the end of the spring, no name or description, the tube is not metal is plastic, but inside the plastic tube there is the metal spring.

Hi There, I would like to request some assistance in identifying some repair parts for some repair parts for International Window company. LOCK IN PINS FOR BALANCES ON S/H VENT S/H TILT LATCHES TILT OUT WINDOW BALANCES (INTERNATIONAL WINDOW ) # 20C CK5 CMC5

Hello I'm searching for 2 items. One is the lock hardware to go inside a slider door. I included a picture of another slider with the hardware still in place as well as the missing one I need. I also need the metal piece that sits behind a strike plate in a metal exterior door that holds the stri ... (cont.)

This is a partial wheel assembly for a PGT sliding glass door screen. There is a spring that is placed under assembly in one of the cavities. Any help or suggestions welcomed. Thank you!

Hello: I am looking for window balance with part number 21 3 ed caldwell. Is 21 the measurement? Physically measuring the window balance (taken from the window) starting from the metal part only is 22 inches. Do you have 21 3 ed caldwell in stock? I would like to order it through Amazon. Thank you. ... (cont.)

I have an old casement window, that I need to replace both locks and cranks(left and right), the window measures 21.5", wondering if I need a 9.5" or 13.5" arm? If you could answer this I would love to get these ordered from you. Thanks

Has Pat5,353,548

I'm needing help for a window I'm replacing coils and balance on I believe it's the wrong one that I took off for the weight of the sash the window weighs 50 pounds and it has 2 coils for each one with 10.0 Stamp on short tail coil and long tail coil can you let me know what I need for the right wei ... (cont.)

We have CGI casement 283 Series windows. We need 5 folding handles in white.Suzanne

The part we are looking for fastens the inactive panel of the patio door to the frame. Do you have this part or know what it is?Thank you!Drew

Local screen repair said they could not find replacements for our screen and recommended new one. Found: The top is part 84-024T. They took out the bottom so I have no clue what it looks like only: 2.5 inches wide 2 inched tall. One hole for screw anchor with a hole for tensioner close. Thanks ... (cont.)

I have ten Simonton double hung, tilt-in windows from the 90's that have issues. Several have broken either the pivot bar or the shoe, or both as I fix up this house. For the lower sash, weighed in at 15.4 lbs on the 31.5 width x 51 height windows, of which I have four, the coil is stamped "408" I ... (cont.)

Hello- do you have a solution for this type of Weathershield weatherstripping? The manufacturer has stated these are discontinued and referred to 3rd party vendors. The remaining options are not desirable (pre-cut sections, overly priced for shipping). Thank you in advance, any help is appreciated. ... (cont.)

Hi Swisco - Need help finding the following replacements?. 1. Channel balance "E38G" - channel = 37 1/8" - need 1 2. Window rotation cams - need 2 Thanks Don.

Need balance kit for single hung vinyl widow, don't know manufacturer. Pics attached

3/4 INCH WIDEPIN STICKING THROUGH SIDES = 7/8 LONG1 1/16 INCH TALL1.25 INCH STEEL WHEEL DIAMETERif you have questions please send an email or callThanks

Hi I'm searching for exact or similar window face guide. It was for a pen at home built 2010 not sure if that information helps.