Viewing all customer Discussions for:

Door & Window

Length = 32 11/16" Stamp = 32-4 Window = Jeld-Wen Vinyl Looks like stamp includes BSI Count needed = 6

8 window locks

Greetings,I have 3 Tilt Out Windows that need Spiral Balances- Tube = 30" long- 3/8 Diameter- Tip is yellow- The window was installed in house in 2008 Dimensions are 70" x 36".Please see photos.I will need 2 Balances per window, times 3 windows.Please confirm what I need and the total price with S ... (cont.)

I'm having trouble finding this replacement or something similar.

I am looking for these screen retainers. I included the latch photo because it is the only identifier on the window. I also am looking for the sash retainer.

Hi, I have a Ply Gem 1100 series single hung vinyl window that I will be replacing the top window sash (internal side of window) and need a replacement white glazing bead. Please advise if you have a suitable replacement. Also, the existing bead is impossible to remove. Any tutorials regarding thi ... (cont.)

my old channel ballance has 1/2 in width and 1690 will the 1650 you sell work?

Will this handle fit a pella 250 series vinyl sliding door?

I am not sure what type of lock this is and but I need a replacement. Do you have a replacement lock like this?

I need part # 39-239B for my windows. I can't find anywhere if this will work with that part? It says this is a "related item" so I'm hoping it works. Thanks.

Trying to replace a Milguard Operator,part# HA-043-OP-SS-WH. Crank is on the left side from inside home

Replacing the mortise lock on my slider door due to the lock breaking. Pretty sure this thing is 20+ years old. The only writing on it is Made in New Zealand and Patent Pending. Thank you for your time!

Hello, Would you possibly have the part(s) shown in the pictures attached? Unfortunately, neither the window or the part have any identifying numbers. The windows are approximately 20 years old. If so, can you provide price and availability? Thank you.Tom

I believe I need Left but not sure of the part number...

1/2" channel width I am not sure about the top and shoe, look like 19-005 and 15-001. Please double check for me.

I hope these photos are good enough. The latch is free standing. No tension to lock or unlock the sliding glass door.

I wanted to convert the existing sliding door handle to include an external lock mechanism. I now think I can see the problem as lock shaft does not line up with the interior latch rod. Note in the "main" picture that there is a recess for an additional wheel / gear that would line up perfectly wi ... (cont.)

I am asking for a recommendation for external tilt latches. My window is ~ 1.5 inch thick (pictured here). Previously ordered 26-132P - Internal Tilt Latch Pair and the hole for the 26-234 - Tilt Latch Actuator didnt align with the hole in my window frame.

Hello, looking for help identifying a replacement shoe for this component in the image it tapers in at the top to permit a coil system to attach and fit into the window frame. Dimensions height ~ 1 3/8 inch width bottom ~ 1 1/4 inch width top (before taper) ~ 1 1/8 inch length (front to back) ~ ... (cont.)

THIS IS A WINDOW BALANCER FOR A SINGLE HUNG WINDOW. THERE IS NOTHING PRINTED ON THE BALANCER. THE SAH SIZE IS 33 1/2 X 28 WITH 1/8-1/8 GLASS. THE ISSUE IS THAT THE CURRENT SASH WOULD SLIDE DOWN IN A FEW MINUTES.NEED SOMETHING MORE STIFF THAN THE CURRENT BALANCER