Viewing all customer Discussions for:

Door & Window

5 inches wide x 71 inches long

need a replacement handle both sides for my sliding glass door. the house was built in 1956

Hello,I need to replace few sash balances on my Milgard metal frame windows. The photos show one still working. The length of the metal part is 26", top guide is 1"1/4, bottom guide 1"1/16 winged 15/16 depth 5/8. The sash weighs 33 lbI need 5 of them.Let me know if you have them,Thank youMonica ... (cont.)

Thumb turn on sliding door lock has broken off. Looking for a replacement. Pictures show all info I was able to find. Thanks!

Hello this part mounds into a hole on the side of the window and acid as a stop unless are you lever is pushed in which will then allow the window to open all the way the inside diameter as shown in the picture is approximately inch and three-quarter's please let me know if you have anything like th ... (cont.)

Do you carry this handle?

These are the images for the outside handle on my patio door. I need the inside and the outside handle for a right-hand opening and for a left-hand opening. I also need the latch levers for each. If it is possible to purchase extra latch levers, I would like to get 4 latch levels. ... (cont.)

Can you help me identify the required spring balance? I need two. They are marked 2330 #. The metal part of the frame measures exactly 24". The top guide on both left and right appears to be broken, but I do not have the missing pieces.... I have included a photo of the top stop, but I don't t ... (cont.)

Hello, ( I ordered a replacement for my awning operator last week....installation was a breeze and it works great....thanks! I want to tackle a couple other windows now.....) I have a Truth Maxim Dual Arm operator, stamped "Truth" and "41012" on the arm identifies it. This is disconti ... (cont.)

Hello, What is the part number for both sides: Northwind three series double hung window-tilt latches

Need 2 extended travel channel balances for one window. Metal channel length: 14 5/8" Stamp 14-5 Milgard 8/26/2004 Top and bottom guides and hook look exactly as pictured on this page. Guides has wings. 5/8 depth

Need to replace both left and right tilt latch for my simonton window. Window was purchased in 1998 or 1999, can you help with finding the correct size that need and do you carry the latch for ordering? Please contact me to discuss, thank you

I am looking for a replacement for a JW Sliding Glass Door with a broken lock

After website review and speaking with one of your reps, I have attached pictures and believe that I need the "subject" items but need to make a custom order since I need the Balance Clip Adjustment 15-198 rather than the standard screw clip. My understanding is that you will verify I have the cor ... (cont.)

Hi, do you have this type of balance? Numbers on the Balance: 23 5 RS-1 VP Length 23.75" Width 5/8" Please let me know if there is any other information you might need. thank you, Darrell

1997 vintage aluminum

I am trying to locate some replacement rollers for an older style patio door.

I need to know what to order. I believe this is for a marvin window. The width looks like 17/23. Length is 37 inches. Thank you,Joe

To whom it may concern, I have some broken cams on the window hardware of my replacement windows. I am sending you detailed photos for part identification. Anthony

The window latches in my house are failing. I have checked your site, but I am having trouble finding a match to these.