Viewing all customer Discussions for:

Door & Window

there's 7+7 written on the part but can you help me identify this window coil balance with shoe assembly? thank you!

Trying to indentify a replacement part. It's has IWC inscribed on the outside. The spring loading of the handle that engages the door lock is disconnected or broken so there's no spring mechanism and the lock is permanently closed. cannot see any external screws to unscrew the sliding door handle ... (cont.)

Needs replacement oarts

Length: 25 and 11/16ths Stamp: 25 5. Another stamp 3.S.I PA Milgard window. Home built in 2005 Need 2 total balances

The window tilt latch crumbled and needs to be replaced. The ones you've posted don't seem to have the spring on the bottom. Dimensions are approximately 2 3/4" long, 5/8" wide and about 5/8" high. Measurements are approximate because the parts have crumbled.

They are 1/2" thick. The code on them are 29 9 RG. Can you please help determine which balancers I need?

U

Simonton single hung window installed in May 2000. Coil is #6.5, two coils on each side, need 2 balances (1 window).

The lock latch is broken, wont catch (very loose). I believe the measurment is 4 3/4.the outside crank handle is cracked (see photo). I have 2 of each on my bay window and would like to replace them. Can I just replace the handle or the whole assy? is there a how 2 video on repairing this? what woul ... (cont.)

Window cranks have aged and cracked with use. Needing to obtain some replacements. Attached is a photo of what we have. The base, and the handle both measure just about 4" long.

Metal piece about 2 7/8" in length

I need a spring replacement the one in the photo broke and won't pull up the window. The window I believe is from American craftsman

For anchoring Series S210-16 type of constant force coil balances

Stamped on the plastic glide frame is "SAUNDERS EMGINEERING"

I need for an older {1995} pella sliding screen door double roller set replacement, I have ordered 2 screen door sets of the present design, but the won't work.

Hello, I’m reaching out regarding a broken crank mechanism on one of my Caradco casement windows. The operator still opens the window, but it no longer closes it properly. Upon inspection, it appears that the end of the spiral shaft inside the operator gear assembly has broken off, preventin ... (cont.)

Whats the part number for the white plastic piece?

The window is at my church

This is from a Milgard sliding glass door that is about 30 years old. the outer portion measures 2 1/4 inches long. the width is 3/4 with 1" steel wheels

I have a pella door and need replacement moulding to hold window pane in