Viewing all customer Discussions for:

Door & Window

The metal measures 29" but the #s on the side say 28 3 gl, so I'm confused.

Hello,Please find attached the photos requested.Thank you so much for your assistance, Mike and TheresaThe first photo is facing down, second photos facing roof, and dimensions are in the third photo.

No names or markings found. Width is 2 1/8". Height is 1". Wheel diameter is 1 1/4".

Hello, I ordered the wrong size top sash guide so I retook the measurements but can't seem to find the particular part on y'all's website. Attached is a picture of the top sash and a drawing of it with measurements. Thank you,

Need a replacement window channel balance and a couple of take-out clips. Channel balance is 27 inch long. Marking says 86 /26-4 IA5 CMC 2. Pictures are attached.

Need 3 patio door handles can you help? They are on very heavy doors.

PPG Herculite k Triple tempered CAN/CGSB 12.1M BS6206-1981-A 16CFR1201 Cll ANSI Z-97.1.1984 1BU SGCC 1605 4401 etching hard to read Do you carry replacement handle? Thank you

I have a American Craftsman patio door kit I need rollers for. The roller body is 2-1/8" x 1-1/8". The rollers are 1-7/16". See photos. Can you help? Thanks Jim

The shoe is the only thing broken on my existing balance. It looks like your Open Cam will fit into my balance.

Metal channel is 33 and 5/8 inches long. Stamp is 33 3. Unknown who made window. Guides are wingless. Window is non-tilt. Block and tackle type balance. Will probably need 4 balances

These block and tackle springs were from Winco vinyl windows

Need to replace 12

Bronze window handle. Part number stamped is 45054 and a 9.

My window opener will push out but must be assisted from outside in order to close. Can not find replacement locally.

The red one is the left lock the blue one is the right lock. They connect directly on the bottom of the window frame and have a little spring underneath them which pushes them up to where they'll catch the notches in the frame.

I'm looking for this part but I need the opposite side to this one!

Please help me identify this piece which broke on several windows.

Hello, I need Certainteed H8637MX window balance coil replacements. The windows are 20 years old. Can you help? Thank You, George

#'s and letters = 22-5 FO CALDWELL. Metal bar is 23" long. 1/2" wide. I will need (4)

The door handle mounting holes are 3 and 15/16 in. The holes for the mechanical insert on the door is 11 in. The mounting holes for the plate on the door wall is 10 inches. Hope that is enough information to identify the parts needed.