Viewing all customer Discussions for:

Door & Window

Need one to replace old one 13 1/2 center can u tell me the cost to ship out

Looking to replace broken storm door latch Cole Sewell door Estate Series # ES 491064

I am in need of a replacement pull tab for my Pella patio door between the glass shade. It is for the stationery door and is champaign colored. I have attached a photo the tab on the sliding door. I hope it is helpful, Pella sent me one put it is curved and thicker than the original one, I need on ... (cont.)

I need coil spring balances for Pella windows that were purchased in 2019. They are a 250 series. I have some with 1 spring and some with 3 springs. I know they take the S160 coil spring. I need coilsprings, shoes and the anchor in which the end of the spring is attached. Shoe is 5/8"thick x 1 1/4" ... (cont.)

The part number is HG04-2003. I'm needing the crank and hinge setup. Do you have this available?

I need both right and left window balance as pictured, are you able to identify what parts I need and availability?

I am thinking this part should hold the window in an up position. It my be partially destroyed. Pics 2 and 4 are of the same window. Pic 1 is a different window with the part more in tact. What is the part I should be looking for? If you have it, I need it quickly.

your 82-013, does it come without a lock and cosmetically nice.

21-717 21-767 Mirror closet rollers

its stamped 5 1/2 on the balance housing. the windows are made in the early 1900's. the coil itself is 3/8". any recommendations for the coil replacement and shoe to attach to window? pics of the coil balance... appreciate recommendations for coil spring replacement and for shoe attachments to attac ... (cont.)

Architectural series in swing French RH PELLA-PEL-0902-DCCIFRH1Z2-036A080CBRN-525S-NFRC Need a multi point lock gear box

I'm trying to replace this handle for our glass patio door

I'm looking to replace the sash seal on. my Milgard Vinyl casement windows purchased in 1995. The say they discontinued in 2019

E45 9727 8-86 36.5"w x 24"h" Need new Andersen window balancer part number

Need a Roller. Thank you.

Can you supply this hardware?

Attached are photos of the spring assembly I have. The assembly measures approximately 28". The windows are Jen Weld, but I do not know the series. The window size is 36" wide by 60" tall. Thank you.Rob

Looking for a replacement balance part number 86 32-4 C85 CMC-1280 written on the side of one

Cool window balance

This assembly is for a heavy storm door for the front of my house. The white part was a latch that kept the door closed. It snapped. I just need that part replaced.