Viewing all customer Discussions for:

Door & Window

Sliding window up and down

The church is 1956 construcción

The Levers To Open The Screens From The Outside Have Broken Need To Replace 2 Openers What Parts Do I Order

Unable to locate any part numbers or other indicators, and have been unable to match with any patterns in stores

trying to figure out what to order. thanks

The windows with these coils are no longer staying up. I am trying to find a replacement or an alternative that can fit in the slots for the existing windows window. The length of the whole piece is 59.5 inches, the width is 3.5 inches and it is 3/4 inch deep. Thank you

Looks very similar to model 39-277 and 278, but the dimensions are: vertical distance between screws: 5 1/4" distance between the two bottom screws is : 1" , openning in the flat bar is 3/8". And the length of the flat bar between the two openings is 2 5/8"

I am needing some replacement channel balances and sash cam replacements and have attached photos. I think I am needing the 351 Series balances in 28". Let me in know if need additional pics or measurements

Need replace door lock/handle set

Patio door latch lever needed. I don't have the old one to compare

Metal part 28 inches long. 1/2 inch across closed side, 5/8 scross open side. Numbers on unit, 27 3 FT CMC 2. Top guide seems to have had wings, none on bottom.

I am not sure of the window manufacturer. It would have been assembled sometime around 1999 as that is the time my house was built. I have several windows that need the balances replaced but I am going to start with one of the smaller windows to make sure I can do it. I am not certain how to remove ... (cont.)

I work with Lee & Cates Glass in Yulee, FL. We have been searching for replacement window hardware for a customer with no success up to now. I have a few additional photos available if needed but hit the max to upload. The stamp on the balance rod is 33H. I need the balance rods, the end as show ... (cont.)

Hello, looking for this old style balancer clip.

Hi, I just moved into a new house and would like to re-key my sliding door. Is it possible to just get a new lock rather than having to replace the whole handle hardware? If not, can you let me know which item I should purchase and any instructions for install? Thanks so much!

Is this part available?

Hello. I am a window contractor. I service window and doors. My client has Milgard Windows. I believe the handles are "Truth". The plastic strip inside the handle is worn out in multiple handles. Can I replace the strip without replace the whole handle? If that is not possible, can you help me ident ... (cont.)

Looks like the pella replacement, but shorter arm

Needing direction to the actual name of this part and where to buy replacement

Jordan windows Dimesions shown in photos.