Viewing all customer Discussions for:

Door & Window

Need a new screen frame corner for my house window. OD of the metal frame is 7/16". Width of the tab going inside the metal frame is 3/4" and depth is 3/8". Entire length from outside of corner to tip of tab is 2 3/8".

Number in picture above

I have some old wooden sash with broken balancers. I'd like to talk to someone about easiest way to reinstall balancers. Sash won't come out until I remove wooden trim stop that retains sash in frame. It won't fit over balancers so must be installed in sash to install. Any hints for holding balance ... (cont.)

do you have something like this

Replacement glass doorknob set #43-007 was a perfect fit for my older 1 and 6/16 inch door. I left the existing rosettes in place. The glass knobs are beautiful and sturdy. The kit comes with 2 glass knobs, spindle and a small Allen wrench to attach the knobs to the spindle. Each door knob has 2 scr ... (cont.)

Need to replace bottom rollers on several doors but do not know part number

I have a balance rod with a 28G stamp on it. Its 29 inches long and 5/8 wide.

We are looking for 2 window parts. Same part but one is right side, and second is left side. Printed markings from dot matrix printer show "9 R" & "9 L". (Dimensions approximately 1.25 inches wide x 2.75 inches long x 0.625 depth.) Can you please help with ordering these 2 Parts. Thank you. ... (cont.)

I need replacement balancers(coil), the window model is 8700 but I can't identify the manufacturer

Please let me know which pivot bar would work.

Looking for a replacement of window lock by the brand name of Value.

Hi I am looking for the top end mounting hardware for a bifold door length 79 inches Thanks

27" metal chanel, stamp: 26-3 manufacture may be milgard. I need 4 balancers.

Old window and can't find any ID. kerf 1/8”wide, 1/4” long. bubble 7/16”wide 3/16”ish tall and it was connected in both sides. It's not a flap

Looking to replace a block and tackle channel balance. Please see attached photos. Windows are approx 20 years old.

Help with part numbers and identifying attached parts.

This is the Type in the parts 2530 BSIEA

Part number 34c BSI

Greetings, Could you please quote me 4 pcs. of this balancer.

Hello, I have a 1973 house with windows. The balance are springs within plastic tubes. The plastic tubes are damaged by age. I am looking to source compatible replacements. The sashes are 24 inches in height and the balances have .5 inch OD.