Viewing all customer Discussions for:

Door & Window

I need 2 covers for my windows.

The metal part is broke. will need 3 replacements

Cannot find exact direct replacement for PGT window. Can someone please assist?

I have American craftsman 2710 single hung windows the sash carrier has crumbled on one side I’ve contacted the company they say the part is not replaceable, but they told me to get a hold of you. Maybe you had something that I could use to get my windows to work again

I would like to purchase these two window openers

Andersen CorpBayport Minn. C85p231074 PAT U.S. 1965 CA. PAT. NO. 3,146,488 Need a 1 left and 1 right side balancer. Window physical size 33 1/2"W x 36 1/2" H

Unfortunately I don't have a picture of the part installed on the door. Hopefully you can still help me identify and replace this part. Thank you!

I am looking for window water seal stripping for old Eagle brand windows

I am searching for this casement mechanism, I can't just replace the handle It has to be the whole thing.

Channel ballast is stamped 27 20 The metal part of the channel measures 28 inches I have purchased channel ballasts before but I believe this is a different size ..ty

Dimensions of door roller: 3-1/8" long, 3/4" thick. 1-1/8" tall, 1-1/8" diameter wheels "V" stamped into body.

I have a Simonton vinyl tilt window from 2004 with two broken balancers. I found one of the three springs inscribed with #4.0 and 35". I'm not sure of your parts will fit. I can send pictures if needed. I will need at least two balancers but will check my other windows before I place an order . ... (cont.)

String tore. Need a repalcemnt please.

Need left and right cranks

Hi, this is an original (80's) door handle from the construction of my condo unit. As you can see the handle just broke off completey. The screws are 2" long and the as you can see the latch or the keeper slides under the frame shaped in an L-shape. It's seem unique and I can't seem to find a brand ... (cont.)

Hi helpful person, Do you sell a part like this? It is from a vinal replacement window (probably obvious). It is approx 4.5 inches long, about 1 1/8 inches wide at the widest. The vertical bars that hold up the diagonal pieces are about 3/4 inches apart. Thanks for your help.

I need replacement wheels from 1986 installation.

Good morning.Do you have replacement parts for Norco screen doors? If so, are you able to identify the part based on the photo that I uploaded? Thank you very much for your help. Bill

See pictures for model number of window. Looks like a home deport vinyl window. shoe apears to be broken. I need either a replacement shoe or more likely two completely new coil balances and shoes. I will need new pivits as well.

I need help identifing a part. It's stamped with 2840 and looks most similar ro your 350 series but the bottom plastic piece is 1 1/4 wide, not 1 3/32. Photo's attached.