Viewing all customer Discussions for:

Door & Window

Hi, Can you please let me know if you have or can get us this part? It is an awning operator. I attached some pics, and below are the details I have. Type II Housing - 1 top hole, 2 bottom holes w/ offset Dimension A - 5-1/4 Dimension B- 1 1/8 Dimension C - n/a Dimension D - 2-11/16 OS Link/Arm ... (cont.)

Stamped....29 2 GU. CMC. 2 Size....1/2 x 30

Please help identify the parts I need to order. The tag on the windows shows they are from Norandex and are Simonton windows. The bottom moves up and down and the top is stationary. On two windows both covers or supports for the spring or coils are cracked--one window far worse than the other--but t ... (cont.)

Hi- I cannot identify the original awning opreaifor these windows. Any guidance? Thanks -Jamie

Please view the attached 4 pictures. Also, this is the info we found on the window: ALI SEM-1; CLA NRG-SAV R; NORCO 3/4; 85-2; 61 On the scissors it has 40055 and TRUTH with an emblem. We'd be interested in the scissors and weatherstrip for 4 windows - 2 for left and 2 for right. Thanks. ... (cont.)

Im looking for 2 replacement roller assemblies for my glass aluminum patio door. I could not find a part number on the existing part, it just said it was a Hilite product.

Original window manufacturer; Alenco 1999 or 2000.I am thinking that the top guide is a 19-005 and the bottom guide is a 15-001. The dimensions all fit except the depth of the shoe on the bottom is not a full 1 1/8" like a 15-001, but it is more than 1" like the 15-002. I think that reflects 18 year ... (cont.)

I am trying to source parts for this Benchmark steel bi-fold door. Can you assist --it is installed on a track. will need the parts to hold it in place and open and close smoothly. thanks

looking for a match on this glazing bead unsure of window maker Measurements Flat top ~3/4" Leg down ~3/8" Back fin ~1/4"

I'll need 8 window balancers. The length is 35 " overall, the metal section without the plastic ends is 34" long. The width is 9/16" and the height is 5/8". Will also need 6 plastic stops that screw into the top of the sash, there are right and lefts. Will need 3 each. The square top is 7/8"×7/8". ... (cont.)

We need to replace the roller assembly and can not find this part in stores nor online.

Wheels had no numbers just said product of delmar . There from sliding windows made around 1972 we have 300 windows in the building .

I can't determine what the replacement is for this broken balance

Here is a storm door knob that just fell apart. Can you find a replacement do you need measurements?

The window balances are S380-31. I need the top sash guides. Can you tell which ones I need from the photos. Measurements: Across the top are 1-5/8 Height is 1-1/2 Width is 3/4

I am in need of replacement pins for my window screens for Louisiana Pacific windows LP WS-5 92-4

We are looking for this crank arm

Hi there, I need help figuring out what type of balance i need to replace this broken one with. There's a number marked on the side: 29 9 AW CMC 7. It's a non tilt window. The length of the metal channel portion is 30". The spring is 18" on the inside of the metal channel. Please advice. Thanks, ... (cont.)

Need to replace. Can't see any markings

I am looking for RH and LH replacement for storm door window latch. Label on door says National Pride National Nail Corp. I have attached pictures of front and back of latch. The markings on the back have a 2 a 30 and on the tip 32 and 23.