Viewing all customer Discussions for:

Door & Window

looking for this glazing bead from a crestline window

Hello! I'm so glad I found your webpage; I need help figuring out what I need to replace on my window. I bought a house with a broken window, called a local window guy, and apparently he didn't reinstall the 'trim(?)' around the glass. Now the glass is not secured and air and bugs can enter. Fro ... (cont.)

Hi Can you help me with part so I can order it

I'm looking for a Semco crank. The one I need says TRUTH and has the numbers 45240 15. Please let me know what I need to order as a replacement. Thanks!

Hello, Attached are pictures of a side by side comparison of the lock body we purchased on order #1103110. The one on the right, the larger one, is the one that we need. Thank you, Briana

This is a Gorell sliding patio door. The door is locking itself when it is closed. We believe the part we need is the multi-point mortise lock with 12? plate. I found a very similar product on your website, but my service tech doesn?t think the ?hooks? are right. Please look at my pics and see if yo ... (cont.)

Need a lock for an existing patio sliding door handle Allen Stevens RD 1965.

Stamp 29-6 Length of metal rail of balance 29 5/8

Can someone help me identify this part?

Hi Please see attached - we require 2 x 5? lengths for a repair hib - we think it is a product you stock but can?t ID exactly which one it is Hope you can help Griff Thomas

Hello, I've had a couple of pivot feet break and I can't seem to match this one up .should I just measure the width of the track and order as needed. I'm concerned a bit with this one as it doesn't seem to have a locking mechanism.

PLEASE NOTE MY PAST ODER NUMBER 1097683......ON 8/9/2018NEED TWO OF EACHTWO window part use to hold down the channel balance AND TWO Pan Am Take Out ClipMICHEL B.

I have a tilt in 3x5 window which has a lower sash which weighs 17 lbs. The spiral balance has a plastic tube and its length is 29" and a diameter of 7/16". The metal portion extending from the bottom of the tube when fully retracted has an extended length of 1" and has two pins which are 7/16" fr ... (cont.)

Can you help me Which one do I need?

Need replacement

The window has number 775 129 in between the pains of glass.Several of these are broke the plastic appears to get brittle.

this has a coil spring and as you rotate the window it lock the slide, put the window back in position and the whole assembly moves. Not sure if the slide needs to come out with the window.

This is a 2 PC white plastic that carrys the multi locking arm on a awning window. Thanks Ben

I am seeking 50 of these corners. Picture shows one half of the corner. It is 1-11/16? long and 3/16? thick. Thank you for your help. Rob

I need to find a replacement for the sliding glass door lock it has 2 mortise hooks in the same unit and the piece to lock it from the inside that connects to the tail piece is broken. All I need is that part. It?s a square rod that goes through the mortise assembly and goes around the tail piece of ... (cont.)