Viewing all customer Discussions for:

Door & Window

I?m looking at a replacement channel balance; S385-15 The window weighs 22.5 lbs Would I split the weight between the 2 channel?

19 2 B.S.I. PAT 659826

3 windows . Top and bottom sash balancers broken. Sashes weigh 25 lbs ea

needing the side post that extends from the window into the side mechanism. Only identification on the window is MDCA KEEPSAFE with an AnSI # z97.1 2009

I need to replace this busted windows balances and need your help selecting the right one to order.

Do you have a 6 5/8 inches sliding glass door handle set? I believe this door is at least 20 years old.

I'm looking to replace the bead on all windows of a 1 story home. Can you help me find something usable?

Hello, I just had a bay window cushion made and I cannot turn the crank without hitting the cushion. Would a 2 or 4 " crank extender solve the problem? My window was made by Pozzi in the 90's.. Thank you!

I am looking for replacement hinges. The original hinges are Mepla. I believe the part number is 698.243.59.00, but there are other numbers on the hinge too. I was checking to see if you have a replacement that would work.

Can you help me in finding out what type of rollers I have on this door. I can't find any names. It's a aluminum door

I have a pella screen door and latching mechanisms will not open or lock do you have replacement parts for this latch

Do you think your Truth Part No.38-005 will replace the hardware in the photo furnished herewith?

no markings. The bottom part that's missing looks like on part: 15-188 I put the sizes in the one photo. I cannot find an exact match. Please advise.

I am searching for replacement plunger for my screens. The make of the windows was Peach tree. The shaft is 1 1/2 inch long. Do you carry replacement parts ? As you can see in the photo, the white caps after 10 years become brittle and crack.

Hello, with the pictures and the information of this being a Milgard channel balance stamped with 25 9 on it could you tell me which size channel balancer I need and sash guide? I bought the S380-25 and the window seems to heavy for the balance springs to hold the window. Thanks! ... (cont.)

Hi. I was wondering if you could help me with identifying this channel balance. Rod is1/2 wide, 28 inch long. The top guide is 1.25 long. The bottom looks like it is broken off but is in picture #2. The last picture is of the entire rod. I think it might be 395, 385 or 380. Can you maybe hel ... (cont.)

Looking for the bracket that goes on bottom of the window has 3 holes in pic below where it was mounted. Thanks, Jeff

Hello, I need 4 of this part for which I do not know the proper name. Anyway, they are for a Wenco tilt window and are the part that the pins on the lower window fit into. The top part that is broken off is where the string attaches and id the string on the other end goes to the spring balance. The ... (cont.)

Looking to replace right hand operator. Unknown manufacturer. Year 1966 in engraved inside. Thank you.

Is 1 1/4" wideby 9/16" thickby 2 1/4" longnumber550 stamped on it