Viewing all customer Discussions for:

Door & Window

I need replacement clips for these old windows and can't find them. Do you have them?

These are the latches I need but are attached to current screens with a rivet. What's the best way to remove the broken old ones and install replacement latches?

Just bought this house and trying to fix the one window that won't stay open. The coil spring is snapped and the pivot housing is cracked. Any idea which part I should order for this particular window? There are no markings on the windows to identify a brand or model.

Need help from bring his part

Included are some photographs of the crank mechanism I need for my Pella windows please let me know what the item is so I can order it from you Steve

MY BALANCER TUBE IS 31.25 INCHES AND HAS 29 5 AX CMC7 PRINTED ON IT.

Can I buy the 39-403 only, don't need the crank and lock kit, thanks.

Trying to replace a pair of balances - looking very similar to model 395, 15", but marked "1490" (then "Jk 16"?) which I can't find. Although it says 16, I measured at 15" (metal part only). Did not weigh the sash, but from memory, it feels close to 20 lbs.

Hi. I ordered 3 x 82-055K "Keyed Handle Set, Acorn" between two orders. The latch broke on the first one almost immediately. After the first one broke I ordered the second and third (one as a spare). Then, the second broke a week after it was installed... so, now two are broken and I have a third ... (cont.)

Dear Sirs: I am searching for corner keys for a storm door glass frame which slides up and down for ventilation. I can't seem to locate a brand name on the door anywhere. I need the corner keys for the top, right side and left side. I am attaching pictures with a ruler for size. The thickness is ... (cont.)

Hi this is Michael from mr fixxall I need prices for the balancers for this customer yes each window has the two different balancers

TRYING O GET A MATCH 17/32 THICK X 1-1/4 wide X 2-1/32" high

We purchased Pivot Shoe 15-045. This pivot shoe was absolutely perfect for our windows... right height, width and thickness. But there is no way that our windows will fit in the pivot shoe. I've attached two pictures of our pivot shoes, which are the same dimensions as the 15-045, but has the ho ... (cont.)

Has ears at top to lock in on aluminum frame with one screw to hold in place.

I bought a lock to install in my sliding door. Part No. 82-303. What I received was only the lock cylinder, but the door handle doesn't seem to have any sleeve or other mechanism to secure the cylinder in position. Is there something else I need in order to add a lock to my door? ... (cont.)

Looking for 200 Bottom clips 5/16 with 5/16 over hang with 1 1/8 x 1 1/8 handle... 200 tops 5/16 with 5/16 over hang and also looking for 5/16 plastic black spline

I am looking for a pair of replacement channel balances for a Milgard single-hung non-tilt window. Upon reading your online catalog, I think what I need is either a S380 or S385 balances. However, from the description I cannot tell which one is right for me. I am attaching pictures of the top and ... (cont.)

Thermotite windows. Crank handle inside reads: TRUTH US PAT 361490 I think. I can't make out the numbers below.

Hi, Wondering what pivot shoe I will need for replacement ? Thanks.

Looking to identify replacement sash guide part number. Channel balances are definitely S380-32- 3130 option. bonus points if you can tell me what hex nut size driver I need to use:) Thanks!