Viewing all customer Discussions for:

Door & Window

Hi! The latch that locks our sliding glass door broke. The door itself, the locking component and the handle are fine. Do you carry this piece or would another latch fit? Thanks!

I think one of these is part # 26-344.. Not sure about the locking one though... Any help?

I have a house built in 1994, it has bronze (brown) Viking windows. Some of the bead has blown off , and some of the latches are broken. I need a box of bead and 10 latches. I have included a pic of the bead, and a drawing of it its hard to measure exact, but it looks to be 11/16 on all dimensions. ... (cont.)

Dear Sir or Madam, please help me find the right replacement part for non-tilt window channel balance. My measurements are below. Pictures attached. Thank you very much! Metal Piece Length 28 inch Metal Piece Width 1/2 inch CHANNEL BALANCE SHOE, WINGED Middle Width 1/2 inch Length 1 3/32 ... (cont.)

The broken lock mechanism is gone - we have tried several that looked like they should fit but were too big - any ideas?

There is a missing section that broke off, about 1/2" or so. Is this part #26-366 on page 9 of your Pivot Bar list?

the part numbers on it are 7700-17 and 2573562 and 7700-19, and 7700-16. all anderson windows

Attached are pictures of the lock and handle set, Please offer advisement on what needs to be done to have this replaced. Thank you in advance for your time

I came across this today and cannot find this anywhere online or on your website. I understand that Alenco doesn't manufacturer this anymore but I'm at a stand still until I find this glazing bead. Any help would be appreciated. Thanks! Joe

I had difficulty using the online forum to send photos. Hopefully my attached photos will open for you. I recently purchased new spiral balances for my tilt windows from you and realize I need to replace my pivot lock shoes. Please help me identify the proper replacement part. They windows were in ... (cont.)

Attached are 4 pictures of locks on my windows. I'm sending 4 so at least 1 of them might show you what I need. I am willing to change the locks altogether, if necessary, to make them actually work. As you can see (hopefully), they are supposed to attach to the windowsill, I guess, but that is ne ... (cont.)

I have a window without any operator. On the remaining hardware, it is printed "Ashland 7D698P".

I have single hung vinyl windows that are 25 years old. The opening sash swings in on hinges on left side for cleaning. I need balances for hinge side and opening side. Windows were either Leveline or Silverline. Not sure which. Balances have a shoe on bottom. Number stamped on this particular ba ... (cont.)

Hello! I live in central Florida. The window in the spare bedroom was difficult to open, until my son forced it, and then it wouldn't open at all. I removed the balance springs, which appeared to be rusty, and observed that the "ear" on one of the plastic shoes was broken off. I need to order two re ... (cont.)

I recently purchased product 82-005. The mounting holes are perfectly in alignment with eachother however the width is not as accurate as I would like it to be for a perfect fit. If you could please let me know if you offer any other hardware please let me know. Any other information needed plea ... (cont.)

We need to replace Exterior/Interior Patio Sliding Door Handles which we believe are a Anderson handle set. Want to replace interior and exterior handles, especially the exterior handle. Existing screws are 5.5" center to center. Height: 7 5/8" Width: Door thickness: 1.75" Two Photo of ... (cont.)

I have a sliding glass door lock that is malfunctioning. When I lock the door to leave, the security lever jumps over to the locked position which makes it impossible to unlock. One part of the lock is stamped DNS Ind Miami Fla the inside part shows 16 inside pull standard dns ind 16. The outside wi ... (cont.)

I received my order of item 82-214 But I need a 1" wide mortise instead of the 7/8". The one I'm replacing has 4 5/8" holes to attach to inside of door. Any help would be appreciated.

Hi There are no visible names numbers, or markings on this hardware. Hope you can help me find this hardware for my garage sliding screen door panels.

I