Viewing all customer Discussions for:

Door & Window

I cant find any numbers or description of the window brand. :(

The rollers are missing. The photos show the bottom of the window where the rollers used to be. Thank you for your help! Robin

Please price this balance with approximate shipping cost and availability. It is 25" long, approximately 17/32" wide and 9/16" deep. It is for a single hung single pane non tilt old window per customer. Thanks Glenda

Please help me to find the white window snap in glazing as the image attached

Bolt holes from center to center is 3&11/16". the Fronts face is round and measures 3&3/16". Width of body is 1/2". 45 degree lever hole. There is a V on side of mortise lock. Turing lever is 3/4" long.

Hello. Would you let me know if you carry this style of channel balance. I think I saw it on your website. Thank you. I know they can coe in different weights and lengths. If you carry the style, I need many.

We are trying to replace the channel balances on an Alenco window and need all the replacement pieces that go a long with that repair. The plastic parts are broken, so we really need everything. Here's the info we have: Alenco window Number on channel balance: 3640 Top and bottom sash cams ... (cont.)

I need a replacementc crank assembly for a 36"x36" Andersen window. Have numbers on the assembly but not sure if they are helpful.

Don't know what to post. It's an grey vinyl glazing stop. Have called several glazing company's and nobody carry. Can you tell me who carry that type of glazing stop? Pictures attached

I

Any information one these broken casement window parts would be greatly appreciated. Hardware is for a condo that was recently purchased. Please review the photos attached. Thank you

Looking for 20 pieces. I believe these are for international single hung aluminum. They square the sash in the frame. Thanks Jim

Please help identify this coil spring, pivot bar and shoe. The coil is 1/2" wide. The pivot bar is 3" long. The sash weighs 14lbs.

Please let me know if 6 of these are available. Susan

Windows were purchased from Stevenson millworker in Ct. They are no longer in business. Part is 2-1/2 inch long 5/16 wide with hole 1" from the end . The broken cast piece goes in the top window and the other bar goes in the bottom window.

Operator 1 opens a window that is approx. 32" x 55". The window opens on the right hand side; the operator and hinge are on the left. Operator 2 opens a window that is approx. 14" x 55". The window opens on left; the operator and hinge are on the right. I marked the paper in the photo with all t ... (cont.)

As you can see in the photo, the numbers stamped in the corner are : D 7 27 273. Hope you can identify, as all of your photos seem to have a tab, which this one does not have...

I NEED TWO ROLLER ASSEMBLIES. WOULD ALSO LIKE TO PURCHASE TWO ADDITIONAL FOR FUTURE Use.

Please assist in hardware that can be seen in the attached photos. Thank you in advance for your time.

I would like to add a key lock assembly to this door. Do you have one that will fit this door? As you can see it is an inch wide and the locking mechanism is for one hole only.