Viewing all customer Discussions for:

Door & Window

the one we took off has these numbers on it: D9 7 #27 4 84 on the other side: 11600-7

Why isn't the series 900 33 inch spiral available in yellow tip? That's what I have and all my other orders gave a tip choice except this one.

I'm putting together an order for parts for some windows in a 1994 era townhouse; the 29" blue tip series 600 balances and the 17/32 pivots match up to what I have, but my tilt sash latches are 2.5" C to C, with 5/8 from the outer screw to the sash edges. Your 26-215 latch says 2.5" C to C, but 3/4 ... (cont.)

Hello, I bought some casement windows from a company called Slim-Line windows and doors in 2000, unfortunatley they are no longer in business. The cranks on the windows no longer opens the windows. I managed to find this number on one of the window locks: CAN PAT2142071 Would you be able to ... (cont.)

need window channel balance, width 1/2in, length 30 in. the 350 series appears to be the right choice however cannot determine if the 15-004 shoe and 19-002 top match mine. stamp reads 29 9 nl bsi. also is there anything else i may need to complete the replacement thanks

You guys are gods! Handle 40-150 arrived today, took 5 minutes to install, and is a perfect replacement part for the handle on my Emco Forever screen door. Bravo! (But do indicate in your item description that this handle works on 5/16" spindles, because truly, that's the width of the spindle on ... (cont.)

Dimensions 1 and 7/16 long pin diameter 1/8 end of pin width 5/16 Please Call me with any other info needed. Thanks, Dave

Hi I believe I have a 380 series based on what I could find on your site however, I'm sure sure of the stamp number. I attached a few images to help confirm the stamp number and whether this is a 380 series. Please let me know your thoughts. Cheers Nathan

Aloha 1) does either 81-243 or 81-255 have a steel wheel? 2) is there an all stainless (housing, wheel, bearing) option? Attached are photos of the animal I am hunting. I prefer all stainless, but at a minimum we need steel wheels. I appreciate your help. Mahalo Simon

This is a 1/2 inch channel balance 21 inches long with a lip on the metal channel for more support.

Hello!! I have a sliding mirror door that I would love to keep out of the garbage stream. It has convex "wheels". I would need a new 5' track-- but I also need some new rollers. You can see the little plastic part on the wheels-- I have 2 intact, and I need 2 additional. Or maybe I need to replac ... (cont.)

I have 3 ROTO window operators which will no longer retain their handles. The ROTO number on the operator is OP05-7501-02. It is similar to your "X-Drive Split Arm ROTO Operator, Vinyl App", Product Code: 39-325, but mine has two actuator arms. I have attached front and back photos. I am hopi ... (cont.)

I need 2 new balances for a 3-5 window.The only numbers I can find are stamped on the balance. The numbers are UB 22E.

Mw window locking handle broken on a double hung ,age 1987 color white

This balancer ( 24-737 ) does not seem to have the holes required to attach the upper plastic cover. Is this a problem ? The current balancer has two counter sunk holes about 3.5 inches from the cord end. I need to order about 16 of these and would like to know what I

Sir, attached are two pictures of the balancer in what I suspect is an Atrium Double hung tilt window. These windows are installed in a USDA Rural Property operated by the Housing Authority of the City of Pekin. Thank you for your assistance. Michael

Casement lock, white 1-left and 1-right Price and availability please

Pic shows existing handle/latch. Photo 0362 shows broken thumb lever. Replacement of unit OK, or if it's possible to replace just the thumb latch, that's ok too. Thanks, Greg

Looking to get an answer on which channel this is. It is 29" long metal end to metal end. There is a stamp on it that reads 28-3.

I may have already sent this, but the note I was writing suddenly disappeared. Forgive me if this is a duplicate. This hinge (#1) broke recently and I am looking for a replacement. The measurements are 1 3/8 across each piece and 2 1/2 (or 2 5/8) long. Picture #3 is the only identifying markin ... (cont.)