Viewing all customer Discussions for:

Door & Window

I attached four pictures of the Pivot shoe that we discussed. Please advise your product number that matches this pivot shoe. When you find the comparable pivot shoe, I also think that I will need the appropriate pivot bar and changing tool. Thanks

Would you be able to tell me if this could be used as a replacement lock for an older Chamberlain Storm Door that still is functional and came with a Mortise lock that no longer is functional?

Any instructions available for installation of internal tilt latches 26-239 & 26-240? I believe these are what I need and the top of my window looks different then that on the YouTube video.

Please review attached to see if you have it or a suitable replacement

Hi I need to replace this handle which is breaking. The wood handle appears to be 10" and the screws to the door are 3 1/2" apart. The handle on the outside has a white plug where I assume on some doors a key might go but not on this one. Can you identify the right part? And if you can identify, ... (cont.)

I need a rubber sweep for Pella rolscreen storm door. It is a double sweep in a single channel. The sweep is 36 inches. The interior dimension of the channel looks like 1/4 inch, although it is hard to measure. What rubber sweep do you recommend? Photo attached.

I am trying to identify the best pivot shoe replacement part for single hung tilt window. I think the dimensions are 17/32 X 1 1/4 X 1 3/32. ???

I am looking for some slide bolts and springs for my sunroom windows. I have a hand drawing with the dimensions. What would be the best to send it to you? I have attached a hand drawing with the dimensions. Let me know if this is acceptable. Thank you, John

Need to replace worn inside door handle from Cole Sewell storm door. I see the original part is not made anymore. Would your P/N 40-150 be a suitable replacement? It seems so but I want to make sure before I order.

Hello, Have an old Allen Stevens Corp part that I need a replacement for. It's a grip opener on a horizontal sliding window. Looks like the part # is 6667. As you can see from the image, that parenthesis shaped part on the left is gripped to slide the window open. Please let me know if you ca ... (cont.)

My challenge is that the wheel is only 5/8" and the existing track will not accept anything larger. There is no off-set however a slight one could probably be tolerated if I purchased two for the same door.

31" Series 385 Channel Balance Product Code: S385-31 My balance seems to match the above product. I have checked all measurements according to your helpful videos and the ends seem to match. The markings on the balance are 30 3 B.S.I. OB I am unsure of the sash weight range option un ... (cont.)

I know the size of balance springs I need based on the stamped #2740. I don't know what clips I need though.

Hi there, this snapbead is made by Better Built and they referred me here! Thank you.

1958 sliding glass door handle replacement needed I've included 5 pictures. Hope you can help Randy B.

You have helped us with replacement parts for these windows a couple of times. Currently, we are desperate to find the UA value and SHGC value of these windows which were installed in 1999 here in Raleigh. We have not been able to locate anyone from Binnings who can help us. Do you have any idea ... (cont.)

Good day, I had some trouble uploading the pictures attached. They are for the American Craftsman 2110 series. The other window parts are for the 7550 Casement. I need the full set of parts for that window as they have rusted severely. THanks in advance. Clyde R.

Needs new crank mechanism.

I need a replacement for this hardware piece but want to confirm the correct one. Mine measures 24-3/4" from one arm end to the end of the other. My best guess is your "Sill Mounted Awning Operator Product Code: 39-348" Please advise, Rocco On the bottom of my operator is Truth 45142 see p ... (cont.)

Attached are pictures of the patio door roller I am trying to match. This is for a door installed when my townhouse was built in 1975. I do not know the manufacture of the door nor are there any markings on the old roller.The roller measures 2 1/2" long by 1" high by 3/4" thick (at the widest point) ... (cont.)