Viewing all customer Discussions for:

Door & Window

I am trying to find replacement snap in glazing for a screen/glass door. I do not know make or model and do not have a piece of the old glazing. The door has a interchangeable screen or glass panel. The dimension of the glazing channel is. 9/32 tall 1/4 deep And a 1/8 step down to t ... (cont.)

I received the S900- 27" spiral balance for my Better Bilt Window and it seems not to be the right size. The window is single hung 54 high X 34 wide and the lower window weighs 18 pounds. For the measurement, I measured from the top of the window to the top of the lower window when closed. 27" is ... (cont.)

Hi. I am looking for your replacement part numbers so I may order. Attached are 3 photos of the rollers to be replaced. A shows the installed roller. B shows the dimensions and the stamp "B221SSP" on the inside of the corner. C shows the backside of the assembly with what appears to be "1225" ... (cont.)

No Markings except R (for right). Slide channel is 1" x 3/8". I can't tell if the bracket slants up to match the slide, if it does it is very slight, Maybe why they fail.Overall length is 3.25"

Need channel balance for non tilt window. Channel size 9/16 by 5/8. Length 22 inch. Stamped with 2130. Need channel balance as well as top guide for sash. Attached pictures: - top of channel balance - bottom of channel balance - top corner of sash Please send me p/ns The window reads ... (cont.)

Hello - I have Pella windows that have the "push button" to allow the sweep latch to turn. Need to replace 12, color is gold. Best price please. Do you offer military discount? Dan

I could not find the exact shape to match this pivot shoe. I do not need exact but i do not want to order a part that will not work for my application. Thank you for all yoor help.

2-1/2" long, 3/16" thick,

I am looking for this bottom pivot bar. it has a slide spring in it to retract the bar for installing and removing the window. I am slso looking for the pivot shoe which i will send images and measurements of in another file. Thank you

Hello, I am looking for window corners (40) for my window screens. I have Superseal windows, made around the year 2000. The windows and screens are white. The screens have aluminum channels with plastic corners; the corners have deteriorated and are falling apart. I have attached photos. T ... (cont.)

I am trying to figure out what locks would be appropriate for the windows in the picture attached. Right now, nothing holds them tight to the house. Please let me know if you can help. These are old locks that came with the house when purchased. They don't do the job and I want to replace the ... (cont.)

I need two of these if you carry them. The label info has an order # :98-2244 DH 2200 5/8" I.G. Width 23.2500 Height 42.2500

I need to know the price off the parts needed 795 sites of 22E balance rods. You don't have the 22E on website, but I was told from a writer when I called that I can get those from you. The D is just not strong enough the widow is pretty heavy. Please get back to me with cost.I sent pictures in a pr ... (cont.)

I'm having trouble locating a replacement handle to a sliding glass door. The thumb lever (which sets the lock) snapped off. The door was installed in 2003 by a local dealer who was using Empire Pacific products; the Empire Pacific products apparently were bought out by a Portland, Oregon, installer ... (cont.)

I have a sample of stop that looks exactly like this however the top fin that measures 1/2", is actually 1/4". I noticed the one you have for sale is for 3/8" glass. The over all on the glass that I am installing is 5/8" Do you carry this glazing for 5/8 OA?

I have a number of Pella casement windows purchased in September 1987. I want to know if the following parts you list on your web site will work as replacement parts for these 1987 Pella windows: 39-363 39-371 39-394 39-395 If yes, will I need to get any other parts (e.g., new crank mechani ... (cont.)

Thanks for all the videos and good info. I have about 7 PGT single-hung, no-tilt windows in house with the same problem: i can't open the window to remove the broken channel balance. The broken channel balance is out of the lower sash except for some length still inside the sash. Most of the cha ... (cont.)

Hello, enclosed are 2 pictures of spiral balances on one of my windows. The balance tubes are 3/8 wide, and 23" long. The color tip is yellow. The window sash is 30 pounds for this particular window, which is a single hung, tilt in window. I have checked my other Windows and they all have the same c ... (cont.)

Part# 82_003

can you help us find 28 3 left and right and a 28 2 left and right for non tilt window Plus 6 window top sash stops.