Viewing all customer Discussions for:

Door & Window

This measures 7/8" across, 13/16" wide on the open front bead part, and 5/16" where it goes into the frame. Cell phone quality pics, sorry.

Screwed onto the top rail with a screw that holds the frame together. It forms a snug fit with the top channel.

I pulled out old roller assembly and installed new one without any promlem. Now as I try to adjust. One of the rollers doesn't move when I turn adjusting screen?

I have 18 pound window, max travel 28 1/4 inches, 2ea 5/8 inch wide coil springs. Coil spring accumulator is 1 3/8 inch square-looking plastic cage 5/8 inch wide anchored to top of moving window with a #6 x 1/2 inch self-tapping screw and flat 1/2 x 1 1/2 metal tongue. Can I use your Series 152 ... (cont.)

Can you please identify a replacement window crank given the attached? It is "brass tone" in color. Thank you!

I'm not absolutely sure if my channel balance is the S380-28 (2740), because it has hemmed edges a tension adjustment screw on bottom guide, and the 15-005 winged shoe I ordered just broke when I tried to push it in. Please help. Please also note there is no names, numbers, or markings anywhere on t ... (cont.)

i got the balance spring but the pivots right and left are broken i need 3 of each

Capitol Window Lock Product Code: 90-006 looks like it will work,but the dimensions shown are nominal.Do you have a more complete drawing.I am not worried about the mounting screw centers,I can drill new holes.Or i can send pics with Dimensions.

Glass patio door rollers. Aluminum frame and roller housing appears to be aluminum that slides into a track in the door

I HAVE 3 MII SINGLE HUNG WINDOWS THAT I NEED TO REPLACE THE SPIRAL BALANCES. I REMOVED THE SASH AND IT WEIGHS IN AT 42 1/2 LBS. THE EXISTING SPIRAL BALANCES MEASURE 34" FROM END OF TUBE TO END OF TUBE. THE SPIRAL BALANCES HAVE A WHITE END (BEARING)AND HAVE A ROUND WHITE PVC COVER THE LENGTH OF TH ... (cont.)

Do you have a Fixed panel clip/patio door lite clip for my patio door? 1.5' X 2". See attached picture.

Need left straight arm 9 3/8

I have wood rivco windows 24 yrs old and am missing some nipples that hold the wood grills in place on the inside. Can I get replacements?

I am trying to locate pivot lock shoes for a vinyl window and don't know the window manufacturer. I have attached a .pdf file picture of a good lock. It is 2 1/16" long, the lock in 9/16" and the channel in 1 1/2" wide and 5/8 deep. From the dimensions I presume that the part 15-121 is the most l ... (cont.)

The rollers for this old sliding door (about 1985) are still working, but not well. Tonight I removed them to take a photo, and then put them back in the door. They don't have a manufacturer name or part number. There is one set at each end of the bottom of the door. I got a similar set ... (cont.)

Need the night-lok. It allows some ventilation with an element of security. You press on the night-lok and slide up and let it pop out. The number on the chambered frame is LTS-88. I can take a picture of the night-lok if needed. It doesn't have any screws to install it. My windows are in fantast ... (cont.)

Swisco, Please confirm for me the operator that I need to get my window working agaign. I need, for two windows, a left and a right straight arm operator. There is just one number stamped on the arm top, 39 My guess is that I need 39-094 and 39-095. These Andersen windows were installed in the ... (cont.)

Do you have anything like this? My aluminum windows use these plastic (delrin?) parts to slide along the track. They are attached with the same screws that hold the frame together.

Please help. We need to replace wheel on glass slider. Older part stamped with d-719. Pictures included. What do you think is the best fit? Thank you in advance, Naomi

1/2" X 33" - has 3230 inscribed on side... see pics Windows are 23 lbs. Also broken hardware on the window frame in some cases. Alum. clips the latch the hook on the string. Are these easily replaced?