Viewing all customer Discussions for:

Door & Window

I NEED 4 OF THESE BALANCERS THE STEEL PART IS ABOUT 24 INCHES AND YOU CAN SEE THE MARKINGS 23BF.. AND I NEED 12 GUIDES IN THE PICS LET ME KNOW SO I CAN GET ALL THIS STUFF THANKS GEO..

I want to know how to order the replacing parts for the Anderson pulley window. It was install 23 years ago. the side are: H 52" x W 37" H 491/2 " x W 25" H 62" x W 33" I cannot find any number on the bottom of the window. Hope you can let me know which one shall I order Thank you, Frank ... (cont.)

Hello, I'm in need of 2 replacement rollers for the bottom of my sliding screen door. My sliding door doesn't appear to have any manufacturer branding on either the glass or the door frames. So, I've not been able to find an exact match. However, the roller arm portion of roller part #84-074 and ... (cont.)

Anderson part number stamped on operator arm is 1361316. Is your part number 39-146 exactly the same? Can I get it in white instead of stone?

Body of Mortis is 3 5/8" x 1" x 1/2" Tongue on both sides (example is broken): is 1/2 in ea. (total length 4 5/8") The Locking arm (?) extends past the body by 3/16" when locked. The Locking mechanism (screw like feature) is 5/8" from the edge of the body. There is writing on the side of the m ... (cont.)

I have a sash balance for Andersen double hung window. Balance markings are: 11600 827 BR89 1194 Please recommend replacement part Thanks

Good Morning We are looking for these balances with a lighter tension . It is my understanding that the first number is the length and the second is the weight , is that correct? We need pricing on about 70 of these.

I have a casement window that the latch lock is broken and is locked shut. Do you know how to get that open to replace the latch? I need LH truth lock assembly 38-099 white. I can't get the window open.

I am in need of 4 guide adjustment hole caps for a Wenco (common caps I think) sliding door-wall. I have a replacement handle in my cart, but I lost the caps that cover the 4 access holes for my slider while repainting the door. I couldnt find them in the accessories link. Do you carry this part? I ... (cont.)

I see that you have the screen latches I need; this is good. Part number is 70-208. These are shown with a flathead screw, but my screen latches have a rivet; some of those are broken. How do I put a new rivet in; or do I drill a hole for screws?

I have attached two photos of my existing vinyl glazing bead and would like to know if the 55-180 bead will work as a replacement.

I have an operator with the same mounting hole locations and construction (shoulder bolt washer, #10-24 thread bushing)as the 39-025 except the link is 2-1/2" instead or 2-1/4" long. I think it is from a Peerless aluminum awning window. Will this operator work with this window despite the 1/4" lin ... (cont.)

I've been putting these covers on my glass patio door track for the last 6-7 years and find that they last about a year or 2 before they begin to flay and have to be replaced. What can be done (if anything)to keep this from happening?

Hello, I have attached a picture, we have a lot of broken screen clips, can I purchase replacement clips, we need about 50 pcs and the screws to hold them in.... will your 70-197 work? Thanks in advance.... Patricia

The only identifying number I see on my anderson windows that need to have the balances replaced is 86/1. How do I know what balance is the replacement without taking the entire window apart to look

DF 1100 model windows numbers stamped on the underneath 7 45034 LH

Can you help me identify and obtain some glazing bead as per the attached pictures

I want to order Lenahan Window Crank Product Code: 39-074 as the dims seek exact to what I need to replace. Please advise which corresponding bolt and bushing I should order to attach the arm. Thanks.

Hi, I'm looking for 4 x 6 foot tracks. The measurements are : Inside track width 6/8" Track height 5/8" Inside groove (required?) 3/16" Please tell me if you have an exact replacement or something that will work. Best, Matt

I need to locate a sash lock for a Pella wood double-hung window which is 28 years old.The original part number from Pella was 0DLQ.