Viewing all customer Discussions for:

Door & Window

The original balances have a a white tip. What color would replace them ?

Just received my order of (2) 80-102 : 6' Sliding Door Track Cover, Small however the track cover is 1/2 wide and the rollers are only 1/4. Do you sell replacement rollers that are 1/2 wide to accommodate the new track cover? 84-028 and 84-075 are the type of rollers that I use

I have a bunch of windows that need repair. I've found most of the parts I need on your site (spiral balances, pivot shoes, tilt latch actuator, etc.), except I cannot identify the internal window latch pictured. The picture shows the L & R broken parts, with the latch ends missing. Please let me ... (cont.)

051

Our screen door keeper has broken off and we need a replacement. Your Patio Screen Handle Assembly (Product Code: 83-003) looks like ours with the same hole and size distances. I don't mind getting a new handle assembly, Which door keeper should we order? Our damaged one looks like either (Produc ... (cont.)

I'm trying to locate a replacement for the window latches in my home; see attached photo. About 2" wide, white plastic and similar to your 90-267 and others in photos on your site. They are very common in this area, but no one sells just the replacement latches... And how do you slide the replace ... (cont.)

I need the mate corner for your part #95-206 white. The picture online just shows the corner key that has the molded in part that opposes the flange on corner that mates with flange screen frame. Do you have the plain corner with the flange only without the molded section that opposes the flange ... (cont.)

I do not know the manufacturer's name and can't find this profile on your website. Can you give me a recommendation on what plastic window glazing might fit? The color is "aged" white. The length is approximately 36 inches. William L. W.

Dear Swisco. I ordered new channel balances for my window but when I went to install them I discovered that the sash guides were also broken. I looked through the many photos on your site but did not find a match. Was wondering if you have others or a substitute that would work. Photos and dimension ... (cont.)

Hello, I purchased a house and the vinyl window pivot bar is broken. The windows don't list any manufacturer or serial numbers. I need help identifying the pivot bar so that I can purchase a new one. Are the pivot bars interchangeable? Or do I need to buy a new window? Please advise. ... (cont.)

the large screw comes out when you try to open the window. I found some numbers inside that were difficult to see. Condo was in 1975 and pretty sure they the original parts. The dimensions are in a photo and appear to be legible. The part number is 11500-3 R.H. I missed a dimension on the drawing. ... (cont.)

I have some windows that match your 770 series balances that are marked 34A. I do not see "A" as an option when ordering them on the website. Can you help me with this issue?

I;m Looking for a window casement do you have this piece. Thanks, Billy

Need replacement part \

I am trying to determine which weight option to select, as I need to order several replacements. It seems that many of my window balances decided that this past year was the best time to break. My current channel balances appear to match the 28" 350 Series (S350-28) and are stamped with a 2730; ... (cont.)

I not only need the plunger pins, I also need the plastic/nylon plugs that go into the window frame that the pins seat into. Can you help me find these? Thanks

I'm replacing my casement window operators 39-146 and 39-147. Do the covers come with the replacement kit? And crank handles are sold separately, correct?

I need new hardware lock for a anderson sliding door

The sweep locks are white and are from windows that do not have any manufacturer identified that I can see. The only markings I can see are on the bottom of the lock piece which has a one on the embossed on the lock, a 9 (or 6?) on the sweep and an icon that looks like a triangle within a triangle ... (cont.)

Trying to sort out the right combination of clips and length for our windows. There stamped with 28C, but measure 29 inches long (not including the plastic parts at each end). Looks like a 1/2" channel though. Here's some pictures of both ends which I hope you can use to tell me the right num ... (cont.)