Viewing all customer Discussions for:

Door & Window

Hello, the broken end had a plastic "T" that fit into a one inch channel with a half inch opening. thats about all the info i have. Thanks,Manny

There are so many to choose from! Ugh!

I see a picture of the woman holding the part that looks like the one I need, but I can't find the part on your site. Could you tell me the part number so I can order some of these. See attached picture.

I have a hurricane-proof window and am missing one of the locking mechanisms. See pictures. The window brand is PGT. The locking mechanism is screwed into the bottom part of the window and latches into the upper part of the window.

I'm replacing pivot shoes and pivot bars a number of Simonton windows. I've replaced a number of the pivot bars already, but have a few windows that also have damaged pivot shoes. Does the 15-192 pivot shoe have the cut out for the round interlock on the end of the 26-336 pivot bar? ... (cont.)

Hello, I have a sliding patio door that was a custom order from either Harvey or Anderson (I cannot find a model number / brand sticker). The door handle is coming loose because the screw hole for the handle itself is completely stripped (unfortunately, not the screw itself). I'm looking to replac ... (cont.)

Distance between screw is 3 15/16.

sliding window looking for a new latch2 1/8 hole spacing the receiving end plate for the latch is very narrow .5 wide

Hi this is the only image i can finagle.; both of the coil balances in this window seem to be broken. I do not want to remove them because I need to keep the window closed for now. I wanna know where i can find a replacement part for this or find one that will replace the existing one. It's a older ... (cont.)

Hi,I’m looking for parts for my window. They are screwed to the bottom of the window and get attached to the latch that moves the window up and down.On my window, both of the pieces broke off. I’ve attached some pictures for your reference. Thank you for your help.

Brookhaven cabinets. I need the part that goes into the bracket that hold the sliding shelf

I am trying to find replacement latches for my 1990s era vinyl windows. They measure 2 28/32 long and 24/32 wide.

Hi, I'm looking to purchase an atrium sliding door series 311/312 replacement handle and mortise with keyed lock. I've attached photos . Please let me know if you have one that will fit.

What spring do i need

Hi, The balancer for my window fell out, and there's been a few others that should be like this that are like this in my house. I don't think this matches any of the available ones in the shop.From what I can see, the only marking on it is 25 3 and BSI RK near the bottom, as shown in the first image ... (cont.)

Good morning. I know Peachtree has been out of business for bout 20 years and I see you have the 26-150 pivots that will work. Can you please help me figure out which balance rod I need. I have several that the plastic carrier has broken apart. I can see that they are U shaped and there is a part nu ... (cont.)

My patio door the track is broke and the door glazing is broke too like the picture door glazing length 7ft5

Hey, I believe this is the same brand so I'm reaching out to see if yall have a replacement crank operator like this one. Thank you!

hi - i'm looking for both the left and right pivot bar to match the one in the photo.

Looking for replacement part.. Double hung window pivot lever (pawl)