Viewing all customer Discussions for:

Door & Window

Th dimensions are 5/8 in. on the top side the snap in side is 3/4 in.

Below are other questions we've answered all ready to help find our needed parts: 1. What is the center hole-to-center hole dimension of your sweep lock? The sweep lock is exactly 2” center to center on the internal and external hardware.

I need 4 pairs of the sliding door trolley schlegel 2231625, I had bought from swisco the wrong type and would like to order the correct variant, I have attached the old roller (rusted and cleaned), the new wrong rollers i ordered, and the drawing of the correct roller i require

I am seeking a hinge/roller assembly for a 40+ year-old Pella casement window, as shown in the attached photo. This assembly mounts on the bottom of the wood/aluminum-clad casement window, enabling it to slide as the roto-operator is actuated. As you can see from the photo the assembly is missing ... (cont.)

Will need to replace parts for both sides, both coils snapped. Bathroom window, (32"W x 31"L- single hung). Not sure of coil tension (no markings evident). Thanks for your assistance.It was very faint so used a magnifier and see the letter "F" stamped on the coil balance. Hope this helps.Al ... (cont.)

The old balance had no clip. It's 23" long and 5/8" wide. On this non tilt window. The last photo looks up the sliding window. I need 2 balances and clips

This is a lock to a 350 series pella crank out window. I have one with a broken handle and need to replace. Is this something you have.

Holes didn't aligned with existing holes in window frame

I need 20 pieces of that please hi

The operator arms broke at the ends so they no longer will attach to the window, would like a replacement. Thanks.

Looking for this roller

Door is one inch thick. I need to know the dimensions of the mortise plate.

I need pivot bars for a Silver Line window. I was able to tape the bar together to get the measurements. Please let me know if this gets you what you need.

I need help to identify this part. I do not have measurements between the as of yet.

I need to order 4 pairs of tilt latches for American Craftsman white windows that I bought in 4/9/2011. The part number for the left one is 8590. I haven't taken the right one out yet.

Hope you can spec the part I need with these pictures. 1/2" in width. All 13 windows in the house need the window balances replaced. Not sure if you can spec what I need without taking the window out. Thanks.

Let me know if I have that parts available

How to get part to adjust built in blinds for novatech discretion Mark

Once the window is open it needs help to close and close and lock. I'm not sure what parts are needed. The windows are Pella

It’s the part that sticks out at the bottom of a window, the part that goes into the window balance. It 1 1/2 and 1 1/2 long on both sides and 1 1/8 width. Also need two white window l locks? For right and left side which measures 1 3/8 w x 3 5/16 h