Viewing all customer Discussions for:

Door & Window

I need spiral window balance with metal clips with metal tube

I am needing 2 S795-28c block and tackle balances with the 15-198 hook on top and the 15-195 t-lock shoe on the bottom thanks

This is a Crystal window part. It the piece that connects to the sliding part to open window

long side is 10" end to end (stamped 18D710S) short side is 9-5/8 end to end (stamped 18 1) bar is 1/2" wide - 1/8" thick

Please help to identify this pivot shoe assembly. The spring is stamped #9.0 35" Thank you

Trying to replace some of my covers in white.. Hope that you have a replacement. Thanks

Need 2 spring packs, 2 shoes, 2 pins for this window. The outside dimension of the height of the window is 26". The distance from the shoe midpoint to the bottom of the plastic spring cover is 21.5".

Need assistance with finding theses corners please

It is bronze in color. Held by a pin. Probably 1960s-1970s. Andersen brand

I believe the replacement is your series 795 and a 15-194 shoe for I'm other posts but wanted to double check since that seems like a screw in attachment point where I have a hook.

Windows clip and lock

Hi, I'm trying to identify this part. I can try to add any additional info that is needed to help identify. The plastic pulley broke on the one balance and I need to get two replacements so I can change them both. Thanks!

Can you help me find this part, the other one is cracked.

Can I get these locks to use keys please

Is it possible for me to get a complete set of this lock

Hi Tom here,Picture of roller attached. Matches product 81-182, except for the plastic top piece? Any ideas? I had to re assemble the door, but maybe the plastic piece can be removed and added to the new rollers?Tom

Hi - This is from an eagle sliding patio door, circa 1999. No key lock. Offset. Bronze or antique brass. locking mechanism no longer works. Do you have replacement? Thanks

Sent to me from someone else. Have no measurements.Tell me if more info is needed. Thank you very much. Sincerely Dakota

Hello, I am looking for the exterior pull handle for a surface mount slider door handle. The hole size is 8" X 13/16". The mounting bolts are 4 15/16" David

We cannot take out of other window . Looking for this part missing on another window