Viewing all customer Discussions for:

Door & Window

Do you have this non-tilt window channel balance? Length is 26. Mark is "25-5" Thanks!

33" window balance with 32 4 written on the side. What do I buy to replace?

I also have many window cranks labeled 2108 for Anderson windows that have broke. I've attached photos. I'm in need of replacements but am having a hard time finding them. The plastic piece in the handle has broken off as well on most windows. Thank you,Kim

Can anyone tell me how to get the old wheel assembly out? I've looked at it. I see one small screw on the outer frame. But that one screw doesn't hold the entire assembly in dow it?

It is 1/2" width, one plastic end is 1" deep, Metal channel is 26-7/8" long. I need help identifying this piece. Thank you.

I can't seem to locate this latch. Anything would be great

only marking observed are two numbers on the back side of the lock. 13466 and 13467

Looking for a replacement for a broken sash pin on a Regency replacement window. The original pin looks like it has a flat upright at a 90 degree angle to the pin. The upright is secured to the window side by two rivets. I'm guessing that it was part of the window molding, not a secondary operati ... (cont.)

Hi there. I'm wondering if you can help me on the following...I can only get my locking mechanism about half way down (provides a seal), but it doesn't pull all the way down on the tie rod, so am just not sure if there is anything I can adjust to get this locking mechanism to full lock closed. Tha ... (cont.)

I'm looking for the replacement piece in the photo that has the screw in it. I believe this is what they call the friction catch which holds the screen slider open. The model number from the glass etching is in the second photo. Also, do you know where that friction catch would be Screwed into the t ... (cont.)

How do you expose the screws on the handle? I am installing a dog door in my patio door, and I need to remove the cartridge from the \ahndle.

I need to add another shelf in my tall kitchen cabinet. To do that I need 2 spacers that attach to the side of the cabinet and the rail fir the slide out drawer. I measure on the spacer from the place that is flat against the cabinet wall to the face that attaches to the slide frame is 1 1/4". This ... (cont.)

I'm trying to determine what kind of pivot shoes these are. They look like your Coil Balance Shoe, Slate Blue Product Code: 15-177.

Hello - I need two window balances for an Alenco window. If they come in left and right, I need one of each. The metal channel is 28 1/16" long. The plastic bumper on the numbered end is 1 1/16". The bumper at the other end is 3/4". The channel is 9/16" wide and 9/16" deep. The part is from an Alenc ... (cont.)

Reg# 072000904830039 Inside patch won't catch. We have to lock screen from inside.

looking for a replacement balance for andersen windows from 1985. any help would be appreciated

I have 2 of these doors in my home. Both doors can open but over the years the latches have broken. I would be looking for a quality of four replacement latches. I would be very interested in the option of stainless if it is available. Thank you.

This building is from 1907

looking to try diy here no experience so need help identifying what i need thx!

These are the spring loaded pins that hold the removable panels in place on a Rusco brand storm door. The image is of the broken pin. The pin broke at the hole where the thumb screw installs. Thanks!